Weaponsmith Archive

With perfect resources, speed caps at 0.00 and SAC at -25. Based upon your other sub components, I would experiment with those stocks and see where your sac is on assembly, and pay attention to the system messages. If you go over the SAC cap on assembly, you could conceivably move one experimentatino point from eff to speed. Or if you come up with 1 on the high side of SAC capping, you could try to get the stocks to -24 with the a tad higher speed.

cool you're the first to ever give me info on component caps

because the ABPH were taking too much factory time I haven't had a change to craft any weapons with those stocks....Guess I'll see tonight

---

flounder05 wrote:
With perfect resources, speed caps at 0.00 and SAC at -25. Based upon your other sub components, I would experiment with those stocks and see where your sac is on assembly, and pay attention to the system messages. If you go over the SAC cap on assembly, you could conceivably move one experimentatino point from eff to speed. Or if you come up with 1 on the high side of SAC capping, you could try to get the stocks to -24 with the a tad higher speed.

---

Im quite positive you wont be able to make 0.00 speed -25 SAC Stocks.

Atm I haven 1.15 Speed and -25 SAC Stocks (when maxing the SAC Line and the rest into speed (amazings on both)

and 0.00 speeed -12 (when maxing speed rest into SAC (Amazings on both)

This is using 826 SR Linsteel Alu and 684 SR Wood with ent buff (I believe Im maxing out the bars with these )

I believe it would require you to max out both lines to get 0.00 speed -25 SAC and that is not possible even with 12 points. But I agree that the caps seems to be 0.00 for speed and -25 for SAC, just not obtainable on the same stock.

You need to decide if you want to trade sac for speed or the other way around.

---

Summerflame wrote:

---

flounder05 wrote:
With perfect resources, speed caps at 0.00 and SAC at -25. Based upon your other sub components, I would experiment with those stocks and see where your sac is on assembly, and pay attention to the system messages. If you go over the SAC cap on assembly, you could conceivably move one experimentatino point from eff to speed. Or if you come up with 1 on the high side of SAC capping, you could try to get the stocks to -24 with the a tad higher speed.

---

Im quite positive you wont be able to make 0.00 speed -25 SAC Stocks.

Atm I haven 1.15 Speed and -25 SAC Stocks (when maxing the SAC Line and the rest into speed (amazings on both)

and 0.00 speeed -12 (when maxing speed rest into SAC (Amazings on both)

This is using 826 SR Linsteel Alu and 684 SR Wood with ent buff (I believe Im maxing out the bars with these )

I believe it would require you to max out both lines to get 0.00 speed -25 SAC and that is not possible even with 12 points. But I agree that the caps seems to be 0.00 for speed and -25 for SAC, just not obtainable on the same stock.

You need to decide if you want to trade sac for speed or the other way around.

---

thank u i thought i was sucking as a smith lol

But if the oringnal poster does have -23 and +0.11 i would say that is godly.

I think Flounder was saying that you could get -25 or 0.0 with perfect resources (allowing for 100%experimentation on that line).

Like Summer said, she's getting -25, 1.0spd.

Well, technically, the decimal point on sub components is in the wrong spot. A stock with speed of 1.10, actually applies .11 speed to the weapon.

---

GrooperNugent wrote:

I think Flounder was saying that you could get -25 or 0.0 with perfect resources (allowing for 100%experimentation on that line).

Like Summer said, she's getting -25, 1.0spd.

---

Yeah, that's what I was trying to get across. Sorry if it seemed muddled.

ehm with -23 sac and +.1 speed I already did that decimal point correction....sorry for not mentioning that

So if I had a stock that was -20 SAC and 0.00 speed, that would be worth using then?

-20 and 0.0 speed would be impossible to craft