Pilot Archive

Thread: Level 6 RE engine project. Your thoughts appreciated :-)

KajaGrae
Thu Sep 29, 2005 1:28 pm
#1

Here's what im working with so far:


Stats Pre RE:

Armor/HP 555.1/555.1

Drain 1289.1

Mass: 9544.1

Y 67.8

P 67.8

R 67.4

Speed 92.2


So far it will net me over 70 on the YPR and about 95.9 on speed post RE.

I have been trying to geta mass of 9040 and 9038, but the owners wont sell (go figure), so I think I should maybe wait there, but what else?


Thanks!


Kaja




KajaGrae


Structural Engineer Extraordinaire
Owner: Tavern of the Nine Aces
1900 165 Fenix Rising, Corellia
Halyn
Thu Sep 29, 2005 1:31 pm
#2


I doubt you'll ever get another prenerf level 6. Shoot for 69+ on YPR pre-RE--it's achievable.


I ended up dishing out some creds to pick up a 8.8k mass level 6 engine, but you've got me beat on reactor drain. Really, I'd try for at least 9k mass and better YPR than that.





Halyn Lance -- Rara Avis Flight School
Common sense is highly uncommon.
...has mastered the Pilot profession.
"I'll type this slowly so even Imperials can understand..."--Michael Stackpole, RS IRC
KajaGrae
Thu Sep 29, 2005 1:42 pm
#3


wow 69 pre eh? Well I have ye tto see it, but I wil lmore than take your word for it. Time to go looting :-)


8.8k! /drool


I wish


I got my reactor down too 4.9k with 14.3k gen

and I have a pre nerf 500 wieght DI @ 14.7

Made my own armor 2.2k per plate 698 f/b

RE'd a lvl 2 cap 1150 energy 35 rechanrge for 1.1k mass and 600 drain.

Im working on 2 RE Boltdrivers, not sure what good stats on those are yet, but I have quite a few lvl 7 guns stashed. worried more about mass and drain there, dmg is esay and effectiveness is not too hard I imagine. I have 2 .318 refires for them so Im good there (I think)


Shields, man this is hard. I cant find a good mass on lvl 7 for my Prtecto nets. I have a 2053 f/b but I cant find anything less than 17k mass. and nothing under 2.1k drain. Is there anything better?


Thanks for your help!





KajaGrae


Structural Engineer Extraordinaire
Owner: Tavern of the Nine Aces
1900 165 Fenix Rising, Corellia
Halyn
Thu Sep 29, 2005 1:44 pm
#4

Aye...I'm just waiting for Pub 24 before I RE my level 6. She'll have some sweet stats.




Halyn Lance -- Rara Avis Flight School
Common sense is highly uncommon.
...has mastered the Pilot profession.
"I'll type this slowly so even Imperials can understand..."--Michael Stackpole, RS IRC
KajaGrae
Thu Sep 29, 2005 1:52 pm
#5


I cnat wait for Pub 24. Im looking forward to the POB changes.


Oh this load is for a TIE Advanced for now. (didnt like the Bellubab cockpit view, and odnt have a JSF due to ground combat challenged). I have done Reb and Neutral Ace once each (crimson phoenix and CorSec) finishing up Storm Squad now (wow so much harder than the other 2 were... feel bad for a noob pilot goin into that mess lol). Guess I just like the rgular fighters. Not much into the Hyper fighters like the JSF and Bell. The Vaksai was ok, but I liked the m22 better :-). Heavy Fighter at heart I gues. can't wait to finish the 2 master missions and try the Oppresor. I actually USED the TIE bomber for that horrendous tier 4 exit mission, as I got smacked around in the Bellubab. LOL!. but I went back with 2 re borstels and made them pay!!.




KajaGrae


Structural Engineer Extraordinaire
Owner: Tavern of the Nine Aces
1900 165 Fenix Rising, Corellia
MachineZed
Thu Sep 29, 2005 1:59 pm
#6

Right don't waste good parts on a great engine, hold out for those better parts. Think of it this way, you have held onto it this long why not try to make it the best ever, not many more pilots are going to be able to best you.


Here I thought I was the only one still with an UnRE'd Prenerf Inferno. I have a pitch of 69.x engine, but everything else you are beating mine.





§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
X Machine'Zed X

Obsidian Dagger Squadron

Alyxian
Thu Sep 29, 2005 2:09 pm
#7

I would definatly wait for better YPR stats. I have an un-RE'd prenerf too, and I have been waiting a long time



Alyxian Gorgaan
"Just an honest Trader"
Will Fly for Booze
Ships, Paint, Missiles, Droids, and More!
Shop located in Tal Kyrte on Lok, in the Mall
StarSider
Ashtirael
Thu Sep 29, 2005 2:38 pm
#8

71 in the pre-ypr stats are achievable, just very fricking rare. I have Yaw and roll at 71.4 and 71.2 but I aint touching it till I get a pitch above 71. Also, I have seen a pic of a post re engine mass under 7k, but have yet to loot something like that


And, agreed. That energy drain is great.
xTekx
Thu Sep 29, 2005 2:39 pm
#9

definately wait for some better PYR.. before I RE'd mine I had 72 on the yaw.. came out to a 75 post RE.. so there's some really nice stats out there



__________________________
xTekx-Omega 9

333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333
333333333333333333333333333333

StellarSwordsman
Thu Sep 29, 2005 3:51 pm
#10






KajaGrae wrote:


wow 69 pre eh? Well I have ye tto see it, but I wil lmore than take your word for it. Time to go looting :-)


8.8k! /drool


I wish


I got my reactor down too 4.9k with 14.3k gen

and I have a pre nerf 500 wieght DI @ 14.7

Made my own armor 2.2k per plate 698 f/b

RE'd a lvl 2 cap 1150 energy 35 rechanrge for 1.1k mass and 600 drain.

Im working on 2 RE Boltdrivers, not sure what good stats on those are yet, but I have quite a few lvl 7 guns stashed. worried more about mass and drain there, dmg is esay and effectiveness is not too hard I imagine. I have 2 .318 refires for them so Im good there (I think)


Shields, man this is hard. I cant find a good mass on lvl 7 for my Prtecto nets. I have a 2053 f/b but I cant find anything less than 17k mass. and nothing under 2.1k drain. Is there anything better?


Thanks for your help!





I have one with 15.2k mass, so yes there are better out there.




Iacemeo Tacot
Jedi
Iacemoe Tacot
Freelance Pilot/Shipwright

Check out my NEW Resource and Loot Vendors Located at (-3800, 4992) BestBuy in Shire on Naboo.
IL-Vec
Thu Sep 29, 2005 4:43 pm
#11


sitting at


P - 69.5


Y - 68.8


R - 68.8


They are out there, you got me beat by 31 on drain though but I'm also sitting on an 84xx mass one as well, gonna be sweet when I finally finish





Greven ILVec - IFN(tarquinas)
Graven - IFN(tarquinas)
Targeter - IFN(tarquinas)
Targeter - HSC's(Starsider)
Pilots: Got Convergence?
Gizmarke
Thu Sep 29, 2005 5:00 pm
#12

I was about to ask for advice about maximum YPR for my pre-nerf lvl 6 engine.


Guess I'll keep waiting. Best I've seen so far is 67.


Thanks guys






-Castin Donn
...has mastered the Pilot profession
Attacca
Thu Sep 29, 2005 6:13 pm
#13

I RE'd my prenerf at 68.5 for all stats. At some point I just wanted to fly with the engine, and not farm anymore. I've never seen an engine above 68.7 - while they are out there they're unbelievably rare, and quite possibly don't drop that high.


Mass can get as low as 9k (I looked that a month ago) and I saw one on SS for 8.8k. I would hold out for at least a 9200 if you're flying TIEs.


Nice reactor drain!







~ Captain Nesanya / Murphey ~
Rebel Alliance A-Wing Pilot
...has mastered the Pilot profession
Are you a pilot and not using Droid Commands?

Page 1 of 2
Previous Next