CUEmu - Thread Posts

ir571

Fri Dec 31, 2004 9:31 am

I have some really good krayt tissues i'd like to toss in a carbine. I have 7, so pretty much leaves my options open. I was just wondering what you all thought. The carbine will be used for pvp only.

Should I go with a dxr6, or laser??

Any suggestions will help. Thanks.

Xal

Xalanor

dsurfman

Fri Dec 31, 2004 10:18 am

#2

with 7 tissues you can either do 2 lasers, or 1 laser 1 EE3 (which wouold be nice). A drx6 will take 5 tissues +1 for schema (I am a WS/Carbineer so I know) so that would leave one for a grinding dh17 which you could sell.

But if yo uare keeping for you go with either two laser (better chance for a DAM slice) or the 1 and 1. What are the stats on teh tissue?

Celehorn

Imperium Securis

Feomatar

Fri Dec 31, 2004 10:25 am

#3

I'd make two laser carbines out of the tissues, that would exactly use all seven. You'll have good chances to get a good slice when you have two.

If you aren't a bh you should pay attention to the speed. A carbineer without any speed attachments or fs speed needs a 1.0 speed weapon to cap every special (except chargeshot2), a carbineer with +25 speed attachments needs a 2.7 speed weapon to cap every special (except chargeshot2). Use form fitted stocks to reach this speed, they are so great, they lower the weapon speed by about 0,8.

Feo Chri'Lar

Proud Non-Jedi Bothan

Master Carbine Fanatic / Master "12 Point" Armorsmith

TAfirehawk

Fri Dec 31, 2004 10:40 am

#4

I would go with 2 Lasers as well.

For now it is just as easy to destroy a PSG as it is work around it with Acid Damage. But that assumes you can stand there and take a beating while you wear out the PSG

Iebas Feania
Former Correspondent of the Former Profession, CARBINEER

wilibus

Fri Dec 31, 2004 10:49 am

#5

I am gonna agree with everyone else here, the 2 laser's is probably your best bet, it will give you decent odds of getting a good slice. Of course is you already have a decent kryat laser i would go with the DXR-6, but then again i have soft spot for that gun

Lawke Eislen | Carbine Extraordinaire | Imperial Pilot Ace

Avaris Eislen | Procurer of Combat Fashions | Kintan, Naboo

ir571

Fri Dec 31, 2004 12:04 pm

#6

Thanks for the advice all, i think they are something like 50dmg, -.3s....something along those lines. I'll let you know how they come out.

Xal

Xalanor

orange5

Fri Dec 31, 2004 3:33 pm

#7

I'd go for the krayted DXR6, on my server they are extremely hard to come around, as opposed to a laser carb, which seems to be more available, imo

Zona Etha

F R O N T I E R-M I N I N G

1S Main Brenn

Xona' Etha

MARAUDER

TAfirehawk

Fri Dec 31, 2004 5:14 pm

#8

AdmiralSpy wrote:

ir571 wrote:

Thanks for the advice all, i think they are something like 50dmg, -.3s....something along those lines. I'll let you know how they come out.

They should be around 360 max damage unsliced. If you are only a Master Carbineer (without the BH line), make sure you get them crafted without stocks. It's very important that you bring down the speed as much as you can, as base speed tissues (-0.3) would only bring the weapon speed to 3.5 or 3.6 with a regular stock.

Actually, you need Imp Stocks to lower the speed then you can go for a damage slice

And yes I am enjoying my collection of 19 Imp Stocks

Iebas Feania
Former Correspondent of the Former Profession, CARBINEER

AdmiralSpy

Fri Dec 31, 2004 9:57 pm

#9

I only have 4 left

Addy | 'Addy
ex-Photographer
Forever Carbineer

samijx

Sat Jan 01, 2005 12:35 am

#10

7 tissues should go into 2 lasers. If you get a good slice on the first you can sell the second for a million $$$ or close to it. If you get a bad slice, try again, and sell the bad slice one for $250k ir so. (As long as they are good tissues of course. ) Oh..and give them really cool names...makes them easier to sell in a vendor.

Sami-jx (Naritus)
Master Weaponsmith, Master Armorsmith, Master Artisan, Merchant 4043

Sambacca (Naritus)
Master Bounty Hunter, Master Combat Medic, Carbineer 0400, Reflexes 0300

AdmiralSpy

Sat Jan 01, 2005 1:03 am

#11

ir571 wrote:

Thanks for the advice all, i think they are something like 50dmg, -.3s....something along those lines. I'll let you know how they come out.

They should be around 360 max damage unsliced. If you are only a Master Carbineer (without the BH line), make sure you get them crafted without stocks. It's very important that you bring down the speed as much as you can, as base speed tissues (-0.3) would only bring the weapon speed to 3.5 or 3.6 with a regular stock.

Addy | 'Addy
ex-Photographer
Forever Carbineer

BloodMonk

Sat Jan 01, 2005 7:40 am

#12

bah I just got my 350 max laser carb sliced (base tissue, +40/40 stock, +41 scope)....31% SPEED

it's 2.5s now...good if you're not speedcapped though.

If you're speedcapped (tip get FS melee speed IV and save money on buying tapes), make sure they use a +40/40 stock and a +41 scope, you should get 370 max, 3.6swith +50 -0.3s tissue, accuracy around +70@ ideal

Sly

Proud Member of -BLOOD-

I HATE GRINDING)

"Invader's blood marches through my veins like giant radioactive rubber pants! The pants command me! Do not ignore my veins!"

Managing the Bloodmonks Weapon Facility (aka Sly's Slavepit), Producer of fine specialty weapons.

TAfirehawk

Sat Jan 01, 2005 8:15 am

#13

BloodMonk wrote:

bah I just got my 350 max laser carb sliced (base tissue, +40/40 stock, +41 scope)....31% SPEED it's 2.5s now...good if you're not speedcapped though.

If you're speedcapped (tip get FS melee speed IV and save money on buying tapes), make sure they use a +40/40 stock and a +41 scope, you should get 370 max, 3.6swith +50 -0.3s tissue, accuracy around +70@ ideal

Sly

That is a great Laser for a Carbineer....

FS Melee Speed is only +12 whereas SEA's can be +25.....a Carbineer needs both if they want to use a damage sliced Carbine.

And use Imp Stocks, they have -0.5 Speed

Iebas Feania
Former Correspondent of the Former Profession, CARBINEER

Carbineer Archive

Thread: Need recomendations on krayt carbine