Artisan Archive
Thread: how many of ya have recyclers now
Page 3 of 3
Zhundult
Fri Apr 22, 2005 4:36 pm
#27
I've got metal, ore, and creature recyclers now. Lackign the spinner blades and agitator motor for the flora, and agitator motor for chemical. The main ones for me though were ore and creature, so I'm content to wait a while before looking into making the others. Though if I find a good deal on agitator motors.....
Ani_cul
Fri Apr 22, 2005 4:52 pm
#28
chalk up another one with all five made.
Took about two weeks (little longer) here for me
And nice to see I am not only one who wanted to do such a thing btw.
Ani_cul
Sun Apr 24, 2005 8:52 am
#29
In case anyone needs/wants it
here is the check list i used in gathering my parts:
*ccb=cheap copper batteries
agitator motor
2 red wires
1 ccb
2 red wires
1 ccb
tumble blender
1 agitator motor
3 blue wire
2 ccb
1 agitator motor
3 blue wire
2 ccb
ore
1 tumble blender
8 pulverizers
1 tumble blender
8 pulverizers
flora
1 agitator motor
1 feed tube
1 processor attachment
4 spinner blades
1 agitator motor
1 feed tube
1 processor attachment
4 spinner blades
chem
1 tumble blender
1 feed tube
1 tumble blender
1 feed tube
creature
1 agitator motor
1 feed tube
4 spinner blades
4 pulverizers
1 agitator motor
1 feed tube
4 spinner blades
4 pulverizers
metal
1 small motor
4 heating elemants
1 small motor
4 heating elemants
Total 'loots' needed for all 5
1 processor attachment
8 ccb
1 small motor
3 feed tubes
4 heating elements
6 blue wires
8 red wires
8 spinner blades
12 pulverizers
1 processor attachment
8 ccb
1 small motor
3 feed tubes
4 heating elements
6 blue wires
8 red wires
8 spinner blades
12 pulverizers
EDIT: does not include the actual schems needed
which are:
2 tumble blender
4 agitator motor
1 each of recycler
seshinn
Sun Apr 24, 2005 10:07 am
#30
I have 4 of the 5 ,
I need one more agitator motor schematic, andI can assemble the flora..
I bought an agitator motor schem in the forums, still has'nt been delivered yet..
Ani_cul
Mon Apr 25, 2005 4:47 pm
#31
In case anyone wants a semi guide for what,where,why on recylers
I have made this thread here.
any info to further it along, please post or pm me. 
X-Rebel
Mon Apr 25, 2005 6:09 pm
#32
ya tonight i went shopping for parts to see what i could get and what i couldnt on the vendor bazzar and the regular bazzar.
ok for a agitator motor sche. they are going for ruffly around 1mill each and you need 4 of them.
you need 6 blue wires going for the average of .5mil each.
spinerblades have yet to see them on the vendor or regular bazzar.
heater elements about 1mil each and you need 4
so thats about 12mil for just these parts
all the other parts i was able to get at a reasonable price or what i consider a reasonable price. If your wondering i spent about 1mil or all the other parts on the vendor and reuglar bazzar.
is it just me or is that really high. now before anyone say Trade forum noob i did not put it here asking for parts it was just an observation on how high things are. To me not unless your a crafter of some sort you really have no need for them. I understand makeing a buck but come on, but then again i seen the recyclers go for about 5mill each. I dont know i guess since i cant find a nitch in the market's i dont know how to make money. Do you think it will be better or worse after the CU to buy these kind of things.
Ani_cul
Mon Apr 25, 2005 6:23 pm
#33
X-Rebel wrote:
ya tonight i went shopping for parts to see what i could get and what i couldnt on the vendor bazzar and the regular bazzar.
ok for a agitator motor sche. they are going for ruffly around 1mill each and you need 4 of them.
you need 6 blue wires going for the average of .5mil each.
spinerblades have yet to see them on the vendor or regular bazzar.
heater elements about 1mil each and you need 4
so thats about 12mil for just these parts
all the other parts i was able to get at a reasonable price or what i consider a reasonable price. If your wondering i spent about 1mil or all the other parts on the vendor and reuglar bazzar.
is it just me or is that really high. now before anyone say Trade forum noob i did not put it here asking for parts it was just an observation on how high things are. To me not unless your a crafter of some sort you really have no need for them. I understand makeing a buck but come on, but then again i seen the recyclers go for about 5mill each. I dont know i guess since i cant find a nitch in the market's i dont know how to make money. Do you think it will be better or worse after the CU to buy these kind of things.
I can say I spent no where near even 5mil to make all five of mine
If you truely want to get stuff done you have to do it.
Start a trade ring, a thread dedicated for people whith like minds trying to collect the same.
Share information you have waypoints, names of folks looting/selling, and pass their names along as well.
Prices go high because we compete, stop it 
Be a community helping each other and you will be surprised what can get done.
Want an example of what I mean? click my sig, the blue part about knowledge understanding and respect
EDIT: before I forget HERE is the thread I did as a miniguide all about Recyclers, so everyone has a one click reference tool.
Message Edited by Ani_cul on 04-25-2005 08:29 PM
X-Rebel
Mon Apr 25, 2005 6:33 pm
#34
Ani_cul wrote:
X-Rebel wrote:
ya tonight i went shopping for parts to see what i could get and what i couldnt on the vendor bazzar and the regular bazzar.
ok for a agitator motor sche. they are going for ruffly around 1mill each and you need 4 of them.
you need 6 blue wires going for the average of .5mil each.
spinerblades have yet to see them on the vendor or regular bazzar.
heater elements about 1mil each and you need 4
so thats about 12mil for just these parts
all the other parts i was able to get at a reasonable price or what i consider a reasonable price. If your wondering i spent about 1mil or all the other parts on the vendor and reuglar bazzar.
is it just me or is that really high. now before anyone say Trade forum noob i did not put it here asking for parts it was just an observation on how high things are. To me not unless your a crafter of some sort you really have no need for them. I understand makeing a buck but come on, but then again i seen the recyclers go for about 5mill each. I dont know i guess since i cant find a nitch in the market's i dont know how to make money. Do you think it will be better or worse after the CU to buy these kind of things.
I can say I spent no where near even 5mil to make all five of mine
If you truely want to get stuff done you have to do it.
Start a trade ring, a thread dedicated for people whith like minds trying to collect the same.Share information you have waypoints, names of folks looting/selling, and pass their names along as well.Prices go high because we compete, stop it
Want an example of what I mean? click my sig, the blue part about knowledge understanding and respect
EDIT: before I forget HERE is the thread I did as a miniguide all about Recyclers, so everyone has a one click reference tool.
Message Edited by Ani_cul on 04-25-2005 08:29 PM
well i have to say you got something going on there so what i have read so far you do this for all the parts or just spinner baldes
I personaly like to go out and kill stuff and get the parts. I dont mind piveing them to people that realllly need them. Last person i gave something to they acted like they needed it and they sold it.
Ani_cul
Mon Apr 25, 2005 6:42 pm
#35
X-Rebel , the spinner blades were the start.
I had posted a thread I was looking for them myself for purchase or barter
a couple other folks askied if afterI get mine the people who help med help with theirs.
So i took it as many of us needed help and a voice and motivation and well I can bump without bumping so to speak
and i turned my own thread into a all are welcome sign up listing.
All though it still lists spinner blades, the list itself has generated support from combat to the effect
most on list have recyclers or are nearly done, with all the parts.
but you have to be persiatant, and speak up with what you want clearly,
and info..share the info, it's why I made my guide so other can freely get the info fast.
this can be done for most any thing, find a group and advertise basically, get heard and seen.
Page 3 of 3