Weaponsmith Archive
Thread: Query about Scythes and Factories
Page 1 of 1
leighthal1967
Tue Aug 31, 2004 9:44 am
#1
Is it possible to make more than the standard 2 scythes from a scythe schem using a factory.And if so,how?
Thanks in advance.
Tepic_Sand
Tue Aug 31, 2004 2:40 pm
#2
Right, easy answer - yes it is possible
Before I explain how its done I better list all the parts needed to make each scythe:
Carbonite Steel
Phrik Aluminium
2 x Geonosian Sword Core (with the same serial number)
Now with all of the above you can make one scythe, if you loot (or craft) 6 geo sword cores with the same serial code then you can get an extra scythe made from the one schematic use;
- Use 2 of the cores to create a scythe manufacturing schematic
- Load up your factory with the remaining 4 cores and the metal
- Run the factory and you end up with 2 identical scythes
After this you will still have 1 more charge on the scythe schematic, which you can either use to make 1 or 2 more blades, depending on how many sword cores you have.
Hope this helps 
Message Edited by Tepic_Sand on 08-31-2004 10:41 PM
Wargfang
Tue Aug 31, 2004 5:08 pm
#3
Look here
http://forums.station.sony.com/swg/board/message?board.id=weaponsmith&message.id=52186
leighthal1967
Tue Aug 31, 2004 7:42 pm
#4
Thanks guys this has helped me greatly.
May all your experimentations be Amazing
Winona
Infinity
Parsifal_Nightstalker
Tue Aug 31, 2004 7:52 pm
#5
Tepic_Sand wrote:
Right, easy answer - yes it is possible
Good answer, I'll just add that if you craft the cores you'll need seven identical power cubes. Yellow cubes are preferable, and at least on Tempest a run of seven identical yellow cubes is not cheap. Of course, you'll need seven solidifying agents as well... 
Page 1 of 1