Weaponsmith Archive
Thread: ABPH low sac + low speed or high damage?
Dont bother experimenting on damage on the subcomponents - its really not worth using your experiment points on (1-2 points of damage per point)
I get the SAC as low as possile of the subs (about -8) and throw the rest into speed. Then cap out the damage on the finalweapon and throw my last 4-5 points into speed.
Ive been"maxing" SAC; 2 or (if im lucky 3) points into speed on subcomponents. So u think this is best to stick with?
Im getting 91 sac with a dps of about 272 max 988, Ive seen a 91 sac with max 1000 and 0.01 slower dps 277. Ive got most of the best resources possible. Im missing one best resource from the ABPH, well 2 if u also count 4 away on the irolumn reactive gas.
I had a look on vendor search and even though Ive been to that guy's shop most of the weapons didnt stand up to my own t-21s stats. I remember the way I was when choosing weapons - I would hunt the galaxy taking screenshots of weapons on vendors until I found the best and then bought some and sliced 'em.
Luckily for me there has been a spate of server best resources spawning right now.
Arethere any tricks I should know about getting the best craft possible from my available experimentation points? I usually "lose" 2 points on fully experimenting a line.
SgtSixpack wrote:
Ive been"maxing" SAC; 2 or (if im lucky 3) points into speed on subcomponents. So u think this is best to stick with?
Im getting 91 sac with a dps of about 272 max 988, Ive seen a 91 sac with max 1000 and 0.01 slower dps 277. Ive got most of the best resources possible. Im missing one best resource from the ABPH, well 2 if u also count 4 away on the irolumn reactive gas.
I had a look on vendor search and even though Ive been to that guy's shop most of the weapons didnt stand up to my own t-21s stats. I remember the way I was when choosing weapons - I would hunt the galaxy taking screenshots of weapons on vendors until I found the best and then bought some and sliced 'em.
Luckily for me there has been a spate of server best resources spawning right now.
Arethere any tricks I should know about getting the best craft possible from my available experimentation points? I usually "lose" 2 points on fully experimenting a line.
Well I experiment about 8 points on the SAC line at once, pop a bespin port and hope for an amazing = 8 amazings.
Same with the speed... put all my remaining points in at once and go for an amazing.
Might need to do it a few times before you get the 2 amazings but you end up with 12 (if your a 12pt WS) amazings from just 2 if you see what I mean.. the chances of you getting this are a lot higher than getting 12 amazings in a row from using 1pt at a time.
Worth wasting a fewresources to geta really good sub-componentyou can then throw on the factory to get 1000 of.
Plus, I don't even waste the ones that I don't turn into a schematic - I "create a prototype item" and then make then into something to go on the bazaar etc.