Weaponsmith Archive
Thread: Whats the correct way to experiment on Advanced Weapon Stocks?
Logix wrote:
Six all-at-once and then the remaining bulbs all-at-once or two-at-a-time.
Thanks, that seemed to work. I got 40/40 instead of 36/36 by doing only 1 or 2 at a time.
Here is what I do...
I first experiement with max first to see. Then slowly go down one by one until the amount gives me a steady "Great Success" rate, rather than the moderate success rate.
Usually it is between 5 bar at a time. Then just keep doing it until you get the stat you want.
I had 40-40:0.661 a few times. Damage is nice, but speed sucks!
I got once the 37-39:0.321 which is better. One less damage, but much better on speed. So basically dont try to always go for damage. Make you the speed is good too. The one or two damage exchange for speed is better bet.
DK
Jedi_Titus wrote:
How high is the SR on the wood you use for the 40-40 stocks?
Logix wrote:
Jedi_Titus wrote:
How high is the SR on the wood you use for the 40-40 stocks?
Stats have no bearing on the stats of the Stock, because experimentation is broken.
I could be using 100 SR wood, you could be using 700 SR wood; we both will be able to get 40/40 stocks.
well kinda... the SR on the wood determines the final wounding, accuracy and ham costs... the speed and damage are independent due to the bugging... 531 SR wood gets me 40/40 -.3998 wound 9 accuracy 29/29/29... 668 SR wodd got it to 40/40 -.399 10 wound 10 accuacy 28/28/28... both of those were experimented 6 +3 +1 (great, amazing, great)... but i know i made around 100 stocks before i got the usable schematics on them... making a stock for accuracy is much easier and isn't bugged... just the speed/damage side is...
I did 6 boxes for 30 tries. The best I could get was
38-38, .4222 (29 HAMs)
I did 7 boxes at first.. then one at a time after, in 15 tries I got..
40-40, .521 (29 HAMs)
hmmm, curious, I gotta try this...best I can get is 38-38, 4.2 or so....had no clue it was bugged, thought it was my SR noomber...