Weaponsmith Archive
Thread: Advice on some Geo reinforcment cores
Page 1 of 1
Arouse
Mon May 10, 2004 3:38 pm
#1
Little story.....
so my guildie saves up 5 identical yellow cubes max damage 20 and brings me them with a scythe schemo, we chat away,i slap the pastes in get all "great results" skip up to my factory happy that i got this and no crit fails...come back with the crate of 4 ready to make my 2 scythes off 1 use of the schemo(i get to keep 1 scythe 
)
)Doh...i made reinforcement cores instead of Sword cores.......foooool so i had to use some of my own cubes to dig me out..
So the quesion is, i have these 4 identical reinforcemnt cores -.58 52-72 what do i stick em in to try and make some of the cash back i lost on the cubes ? waht will ppl pay cash for ???
Do i wait round and see if there is a new uber weapon that needs 4 identical Geo reinforcement cores ?
Do i make power hammers ? Stun batons ?
Any suggestions would be greatly appreciated.
TrystramStrykker
Tue May 11, 2004 5:28 am
#3
power hammers would be a waste of time. your best bet would be stun batons. With a nice slice, i believe you can probably hit a 200+ dmg stun baton. Which you probably can make back most of your money on.
Using them on a power hammer would increase the unsliced dmg by approximately 30, which means that instead of a 465 hammer, you have a 495, a 6% damage increase. A stun baton would increase from 130 dmg to 160, a 23% damage increase.
So i would suggest using the four on stun batons, and praying for all damage slices, which can fetch you at least 500k each (depending on server economy).
Using them on a power hammer would increase the unsliced dmg by approximately 30, which means that instead of a 465 hammer, you have a 495, a 6% damage increase. A stun baton would increase from 130 dmg to 160, a 23% damage increase.
So i would suggest using the four on stun batons, and praying for all damage slices, which can fetch you at least 500k each (depending on server economy).
Arouse
Tue May 11, 2004 11:23 am
#4
Thanks for the advice, i did put one in a powerhammer as a "sorry" to the guy that brought me the cubes, and yes, u r right, only30 extra damage on it 
worth jack...think i might go wiht the stun baton idea.
worth jack...think i might go wiht the stun baton idea.
Nyan
Tue May 11, 2004 11:33 am
#5
Or you wait till next publish because the new 2 handed weapn that requires 2 identical geo reinforcement cores
APB
Wed May 12, 2004 12:25 am
#6
You would have only been able to make 2 scythes total from those cores anyway...each of which would have required one use of the schematic.
You need 7 identical cubes to make 2 scythes from 1 schematic use(breakdown follows):
7 cubes
1 cube for the core schematic for the factory run
6 cubes to make cores in the factory
6 cores
2 cores for the factory schematic
4 cores to make scythes in the factory
And a little advice for next time. If you can get solidifying agents and yellow cubes in series of 7 each, you'll be able to add even more damage to the end result.
Arouse
Wed May 12, 2004 4:49 am
#7
2 scythes was wasI was aiming at with 5 cubes, you dont need to put the final sword through the factory, so 1 cube and paste for the initial sword core, make 4 off this= 2 hand crafter Scythe's
5 cubes in total
MisplacedModifier
Wed May 12, 2004 6:01 am
#8
Arouse wrote:
2 scythes was wasI was aiming at with 5 cubes, you dont need to put the final sword through the factory, so 1 cube and paste for the initial sword core, make 4 off this= 2 hand crafter Scythe's
5 cubes in total
That would be 2 crafts, which would use both uses of your schematic.
Page 1 of 1