Weaponsmith Archive
Thread: Power Hammer Problem
Page 1 of 1
Iney
Sun Jul 17, 2005 2:12 pm
#1
Ok i just mastered weapon smith, so im only 10pt, but i started crafting powerhammers. Tried every exp cap kind to the max but damage just wont change. THe sub comp only changed very little and on the hammer itself max damage changed like 5 pts it basicaly didnt mvoe from 845 max. The resources im using are all over 850 for both the hammer itself and the sub comp most are over 900 so all damn near full green. but the damage just wont break 1k even with the damage % at 98 which is where i got it. Any advice?
leighthal1967
Sun Jul 17, 2005 2:19 pm
#2
Better resourses needed here.Try finding out if your server has had one of the new JTL coppers spawn with 900+ shock resist,this will help on the final build.
AldaronTavish
Sun Jul 17, 2005 3:58 pm
#3
If you want to break 1000 damage you are going to need a very nice acklay bone or good yellow cubes and solids (bone would probably be easier)
mad99skilz
Sun Jul 17, 2005 4:14 pm
#4
you don't need bones, cubes etc etc, just good resources. my unenhanced power hammers come out to 1010 max damage and I can get the SAC down to about 110 or so.
Resource stats that I am using...
Ditanium Steel - UT 835 (cap is 838) for the advanced reinforcement core
Kammris Iron - SR 995
Conductive Borcarbitic Copper - SR 931 (cap was 800 pre-JTL)
Madden
Master WeaponSmith(12pt)
Master WeaponSmith(12pt)
Iney
Sun Jul 17, 2005 6:21 pm
#5
well, now i know its not my resources..... i think its lag or a bug i jsut made 1 full damage exp came out to be 1011 max damage and 2.7 speed and im only 10pt but then i did the same for the next 2 and they stayed at 844 and the 1 that hit 1011 was all great success just like the next 1's
Iney
Sun Jul 17, 2005 6:31 pm
#6
another update on my prop
i was noobing it all up and expermenting on weight and accuracy half the time not accuracy..... going from the sub comp damage in on top so i just clicked on top and experments on that and not damage. haha thanks alot guys
Ben3215
Mon Jul 18, 2005 4:15 am
#7
Resource quality is the key. My PH's are all over 1000 max and I am only a 10 pointer too, but we had a spawn of 1000 SR Iron, 990 SR Steel and a 960ish copper. You might also want to try using a Geonosian Reinforcement core as well. You can add a cube and a solidifying agent to the core which makes better damage as well.
Good Luck
Page 1 of 1