Weaponsmith Archive
Thread: DE-10 Help
Page 1 of 1
Everitt_Cage
Thu Jul 07, 2005 6:28 am
#1
Other than a DE-10 schem and DE-10 barrel, what components would you recommend using? I know it needs 3 krayt tissues, but what else? What other types of things, like barrels, scopes, gorax shards, etc?
Rico4
Thu Jul 07, 2005 7:30 am
#2
Well it sounds like you have what you need already
Ithink you can only make the really high damage DE10s if you have a Pre CU Yellow Barrel ( if your krayting it it shouldnt matter anyway)
Also try using a good pre cu scope to get good accuracy with no drawbacks.
Other than that its down to good resources- Plumbum Iron, Diatium Copper and a few normal minerals. And try get 3xtissues of around 140-160
klabe00
Fri Oct 21, 2005 1:49 pm
#3
I've made 5 DE-10's with yellow and white barrels / post and pre-cu both... The absolute best ive been able to come out with has been a 931 max damage - is getting above a 929 just luck based upon the hidden stat on the barrel?? 929 is max for slicing as well, so cant get the 960 that way either. Could use some advice here, this is starting to get expensive. lol
Wookiee-Combat-Medic
Fri Oct 21, 2005 3:09 pm
#4
i made some de-10's i used pre cu barrels and i got 1 to 960 and sac 66
klabe00
Sat Oct 22, 2005 6:58 am
#5
Well im using the 182/-8 and 184/-8 epc's which i experiment all the way into sac with the rest left over for speed - and everytime ive tried i end up with anywhere from 223 to 228 abph's that are either -17 or -18. After i get them back from my factoryI start on my second stage crafting and add the barrel (ive tried post and pre-cu white and yellows) and scope which is usually a +12 -0.79 attack speed. After doing all of this, getting my resources added, etc (they are all green that take the bar up to about 98 - 99% full on all) I take some Pyollian Cake and hit assemble. And everytime I end up with a weapon that is around 842 max damage / 90 sac ... I experiment about 3 points at a time using bespin each time i spend points --- With the 5de-10s I have done im using my 12 experiment points in various places, but typically ive been trying to go forfirst a sac cap and then a damage cap but ive even made some that are 75sac and ive tried going for damage on others, but regardless, when i get up to 929 on damage I get a notice telling me that that is the MAXIMUM damage for the weapon and at that point I cant experiment past it. Ive not been getting these barrels myself, these DE-10's ive been trying to make are for custom orders, so im thinking maybe the barrels im being given arent actually Post-CU bu actually Pre-CU which arent giving me the + to damage to get up to a 960....
[k]
Message Edited by klabe00 on 10-22-2005 09:02 AM
nebaf
Sat Oct 22, 2005 12:31 pm
#6
I've been able to make double-capped DE-10s using Post-cu barrels and 170+ damage enhanced power cells. The pre-cu yellowbarrel I had allowed me to hit 960 max damage but only a SAC of 85, whereas 2 of the barrels from a stack of 4 DE-10 barrels I had bought allowed to me to double-cap the DE-10.
Hope that helps
Oh and I made the DE-10 by doing the following:
Experimenting all the way into SAC on the Adv BPH, then using the remaining points in speed. The stats on the Adv BPH were around 220 max damage, 1.5 speed, -18 SAC.
Used a post CU barrel, an Adv. weapon scope with around -.79 speed, and Adv BPH with stats similar to those described above to make the DE-10. I then experimented all the way into damage, then with the remaining 3-4 points I was able to go from 75 SAC to 65 SAC.
Message Edited by nebaf on 10-22-2005 03:42 AM
Page 1 of 1