Weaponsmith Archive
Thread: Question about Czerka Carbine and min dam
Page 1 of 1
OkthaJ
Tue Oct 25, 2005 4:54 am
#1
hi,
im interested in a capped Czerka!
my question what is the highest min dam any of u ever made on a Czerka,
other question how good gorax shards i would need for something like that?
6x 180 shards? or higher ones?
and generaly whats the carbine with the highest possible min dam?
flounder05
Tue Oct 25, 2005 5:11 am
#2
My current Czerka has a min damage of about 395. Of course I made it with +85 shards so I could put a full damage slice on it to up my min even more. 35% damage pup and it hits 530 min.
Level 54 carbines usually get to a min of around 420. So, if you were wanting to put a damage slice on it, the min would be about 454. Then with a damage pup it would be about 613.
Of course, you can always up the min damage by using a looted stock. However, when doing this, the SAC will kill you.
Level 54 carbines usually get to a min of around 420. So, if you were wanting to put a damage slice on it, the min would be about 454. Then with a damage pup it would be about 613.
Of course, you can always up the min damage by using a looted stock. However, when doing this, the SAC will kill you.
Anarchicgorilla
Tue Oct 25, 2005 10:39 am
#3
you can make one with min at 420 or so with +29/2? looted stocks
However the sac will be 
with crafted stocks i get the 380-390's too
Message Edited by Anarchicgorilla on 10-25-2005 12:41 PM
flounder05
Tue Oct 25, 2005 11:02 am
#4
I only use stocks on low grade weapons where the SAC won't be an issue. For example, I made my BH/Carb toon a tusken rifle with a looted stock. Since I'll fire it far too slow to run through my action.
Page 1 of 1