Pistoleer Archive
Thread: which trees first
Page 1 of 1
roybert826
Fri Jul 16, 2004 12:46 am
#3
i'm a novice pistoleer and i was wondering which trees to complete first. i also would like to know the best way to level up. thanks in advance.
gibsonSG
Fri Jul 16, 2004 9:25 am
#4
Tech tree first definitely, and shoot lots of quenkers on Dantooine in a solo group so you get high spawning 99 level missions. I worked on accuracy next and dodge last. Get a DX2 with a good speed slice and stick a speed powerup on it, you'll end up with 1.2-1.4 speed or lower,so you'll be hitting pretty fast. FWG5 pistols can be sliced low too for heat damage, as can DL44's for energy(I sliced mine w/pup to 1.0 speed). I'm not the biggest fan of republic blasters but the enhanced ones are ok (bleed dot available at most good WS's) but the speed is a little slower
If you have any way of healing poisons/diseases then walk around Endor and get a skillbox every 30 mins or so just by walking back and forth between a few lairs.
This is all with buffs/armour/citrus snowcake for accuracy and synthsteak etc
If you have any points for medic, get yourmed use high enough to use stim C's or higher, because you'll get hit a lot before your defences improve.
Good luck and enjoy
reptile80
Sat Jul 17, 2004 5:18 pm
#5
I would say the tech tree, get stopping shot, and fan shot and do quenkers.
Digitalphobia
Sat Jul 17, 2004 6:16 pm
#7
Hey,
I got just Fanshot, but it doesnt seem to be very effective like HS1/HS2. I know it is a cone damage attack. How am I suppose to keep quenkers in the cone domain? I ran around to keep them behind me. Is it a good thing to do?
Thanks,
Q
I got just Fanshot, but it doesnt seem to be very effective like HS1/HS2. I know it is a cone damage attack. How am I suppose to keep quenkers in the cone domain? I ran around to keep them behind me. Is it a good thing to do?
Thanks,
Q
Denigenus
Sat Jul 17, 2004 7:12 pm
#8
Might I ask why you're not the biggest fan of Republic Blasters?
Denigenus
Sat Jul 17, 2004 7:14 pm
#9
Oops sorry I should have specified my comment refered to gibsonSG's
" I'm not the biggest fan of republic blasters but the enhanced ones are ok (bleed dot available at most good WS's) but the speed is a little slower"
Thanks
Atama
Sat Jul 17, 2004 7:59 pm
#10
I never had to fight more than two quenkers at once, and usually they stood right next to each other so getting them in the cone wasn't hard.
The best weapon to use on them is a geo blaster (once you have tech 2 of course). Why? 2 reasons.
1) They're somewhat weak to stun.
2) The stun blast won't damage the lair, so if you use fan shot you won't be hitting the lair by accident and spawning more quenkers to overwhelm you.
Of course you can switch to a republic blaster or FWG5 to take the lair out.
The best weapon to use on them is a geo blaster (once you have tech 2 of course). Why? 2 reasons.
1) They're somewhat weak to stun.
2) The stun blast won't damage the lair, so if you use fan shot you won't be hitting the lair by accident and spawning more quenkers to overwhelm you.
Of course you can switch to a republic blaster or FWG5 to take the lair out.
durks
Sat Jul 17, 2004 10:22 pm
#11
Digitalphobia wrote:
Hey,
I got just Fanshot, but it doesnt seem to be very effective like HS1/HS2. I know it is a cone damage attack. How am I suppose to keep quenkers in the cone domain? I ran around to keep them behind me. Is it a good thing to do?
Thanks,
Q
yes
Page 1 of 1