Pilot Archive
Thread: Level 8 engine what to aim for?
Page 1 of 2
DeepFatFryer
Tue Oct 18, 2005 4:49 pm
#1
I've just done a spree on the bazaar and found my old QID (it's absolute pants
), and decided to see how near to being able to RE I am
.
The lowest of all important statistics are: (I've tried doing the 5% bonus RE thing to the side too, but my maths is probably flawed, i'm an eedjit
)
Reactor Energy Drain: 1344.0 = 1276.8 (If pub24 comes and works
)
Mass: 25316.0 = 24050.2
Pitch: 69.8 = 73.29
Yaw: 69.4 = 72.87
Roll: 69.4 = 72.87
Top Speed: 93.4 = 98.07
It's obvious I should try and get a better high speed, so i'll be harrasing guildmates to do the QID quest
. How far higher should I be aiming on the other stats?
The lowest of all important statistics are: (I've tried doing the 5% bonus RE thing to the side too, but my maths is probably flawed, i'm an eedjit
Reactor Energy Drain: 1344.0 = 1276.8 (If pub24 comes and works
Mass: 25316.0 = 24050.2
Pitch: 69.8 = 73.29
Yaw: 69.4 = 72.87
Roll: 69.4 = 72.87
Top Speed: 93.4 = 98.07
It's obvious I should try and get a better high speed, so i'll be harrasing guildmates to do the QID quest
CNevyn
Tue Oct 18, 2005 4:57 pm
#2
I'm not sure 'bout drain at the moment, I was told to shoot for 71.5 in the PYR. It is possible to find higher stats, but my patience is near an end. Just waiting for Pub24 to go live, and survive w/o crashing for a week or so before I risk my RE set....
Higginsis
Tue Oct 18, 2005 5:00 pm
#3
Oh dear crixx, we'll talk ingame, i'm sure i can help you out.
DeepFatFryer
Tue Oct 18, 2005 5:08 pm
#4
Higginsis wrote:
Oh dear crixx, we'll talk ingame, i'm sure i can help you out.
<3
KaylBreinhar
Tue Oct 18, 2005 5:57 pm
#5
71.5 will grant a perfect 75.0, and that's probably coming from the first edition of my thread, before I had a better understanding of the PYR gates for 1.3-1.5 mods.
IDEALLY, 74.0 pre-RE (which I believe is the minimum one would need for a 1.4 mod at 77.8 post-RE) should be your goal, but typically anything in the 73.5-74.0 range will suffice.
IDEALLY, 74.0 pre-RE (which I believe is the minimum one would need for a 1.4 mod at 77.8 post-RE) should be your goal, but typically anything in the 73.5-74.0 range will suffice.
jimbrown
Tue Oct 18, 2005 6:49 pm
#6
holy snap, 73-74?
since launch of JTL... in all the lvl 8 engines ive looted. the current high i have, is 71.2...
W.T.F >_<
Higginsis
Tue Oct 18, 2005 6:54 pm
#7
jimbrown wrote:holy snap, 73-74?since launch of JTL... in all the lvl 8 engines ive looted. the current high i have, is 71.2...W.T.F >_<
They're rare, really rare infact, but they're out there.
FLMOPE
Tue Oct 18, 2005 7:47 pm
#8
In my experience 72+ isn't nearly as hard to find as your low reactor drain. I have an estimated 80+ engines and only one is below 1400 RD. While I have 3 right now above 73 PYR and about 6-7 more above 72. One of the 73+ is also a sweet 23202 mass
Dravic
Wed Oct 19, 2005 4:35 am
#10
What's good speed for a QID? I think I got a good one earlier, was 100.8 which should RE to 105.84.
EfreaK
Wed Oct 19, 2005 5:19 am
#12
I have given up on getting a better Pitch lvl8 engine. 72,5 will have to suffice (pre-re). Just want my new engine, also 20k mass (pre-re) and 1260ish power. If drain bonus is applied, I'll be happy.
The new EO4 engine for my RGI
Dravic
Wed Oct 19, 2005 5:35 am
#13
bhorus wrote:thats pretty good, the best ive seen was 104.6
Sweet, buying ROTW for my 2nd account wasn't wasted then
Page 1 of 2