Merchant Archive
Thread: Can't get the vedor to initialize please explain the work around. Thanks.
Page 1 of 1
Granzho
Fri Jan 23, 2004 6:23 pm
#2
Remove Vendor..
Create Vendor..
Drop and Initialize vendor ..
Keep bringing up the radial menu until there are only 3 options.. *I haven't confirmed if this actually helps ..
Use Vendor .. *if you get the messge vendor not initialized then repeat
I haven't heard of a work around except for the 4th step.
CavemanGamer
Fri Jan 23, 2004 8:46 pm
#3
ok I finally got it to work. I used the method (described on another thread).
create vendor & log out
placevendor & log out
rotatevendor & log out
initializevendor & log out
Then it worked.
KwoungSy
Sat Jan 24, 2004 2:18 am
#4
This never fails:
1. Place Vendor
2. Initialize Vendor
3. BROWSE THE VENDOR <-- key step
4. Pay Maint
5. Rotate / Load stock
WookieBounty
Sat Jan 24, 2004 1:37 pm
#5
Too hard that is.
Just place the vendor initialize then use vendor. thats it.
keep the vendor highlighted the whole time. highlight then initialize then it says vendor intialized the very next thing to do it go to use vendor on radial menu. This shoudl work much easier and faster!
Page 1 of 1