Jedi Archive
Thread: So what passes for a decent saber now?
Drakkosith wrote:
sememon wrote:
600 max damage, FC below 25 and SAC below 110 is a good goal on post cu sabers.
anything with over 600 damage and a named colour crystal will be good enough for pvp.
700 damage and above can realy only be found with pre-cu pearls.
Yikes, that's a really big number for FC. Are most people coming out with around this number on a 4th gen saber?
on post cu sabers with post cu crystals/pearls having FC below 25 is acceptable.
- Base FC stat on 4th gens is 48. most post cu crystals/pearls seem to have an average of around -6. so 48 -(6x4) = 24.
- Damage is IMO the most important stat on crystals/pearls now, so an fc this high is acceptable.
- FC is not as important as it was pre-cu, theres now little difference between FC10 and FC20, the primary reason for experimenting in effeciency now is to get the SAC down.
personaly, my saber is around 700 damage, 1.25 speed, FC15, SAC 100 with banes heart. I can get the FC down to about 9, but I loose about 30 max damage.
Message Edited by sememon on 10-09-2005 10:44 PM
502-598, 1.55mod speed(MLS, no tapes), 19FC, 96 SAC
Could get damage up to about 630, but it would up FC by 3 points at least.
Message Edited by agkBenny on 10-09-2005 03:30 PM
Post CU Saber: 598 max SAC 99 FC 31 Sunrider
x444 LS with +15 Exp CA and post CU Pearls 110; 90; 81; 73. (still working to improve these!!)
Pre cu pearls -post cu made ------718 max dam 1.34 speed 96sac 660 DPS 15 fc---only stat im kinda bummed on ----other than that its ok
Message Edited by iriemon on 10-09-2005 03:36 PM P.S. This is with ls speed cap and +19 general melee speed, so still a far cry from the uber PRE CU ones
Message Edited by iriemon on 10-09-2005 03:40 PM
Coreceren wrote:Meaning, what's good in the FC, speed, and damage stats? I'm reading and hearing things all over the place, but nobody's put up an "ideal" or a "high score" for the new guys to shoot for.Message Edited by Coreceren on 10-07-2005 06:26 PM
A 628-732damage 13FC 100sac one is pretty good
I believe I grinded with you and Bik on occasions. Let me know (here) how your crafting gets on.
I was also a Master Lighstaber.
Good luck
Message Edited by Ventuviper on 10-09-2005 03:51 PM
Mines 619 max dam
97 SAC
28 FC
2 pre CU pearls. 2 post CU
1.49 ATK spd
runs until 3/12/06
Ruby Stinger
Variation Of: Fourth Generation Lightsaber
Condition:1000/1000
Object Creator:seana
Serial Number:(rj5iddq5)
***Special Note***:This item will not decay from use or death.
Force Power:49 (20)
Combat Level Required:54
Skill Required:Jedi Initiate
Damage
Base Type: Energy
Attack Speed:3.41 (2.69)
Your modified Speed:2.22(1.75)
Damage:145-241 (539-635)
Elemental Type:Electricity
Element Damage:60 (159)
Accuracy Bonus:0
Wound:31.33% (36%)
Estimated Base DPS:74.12 / sec (277)
Your modified DPS:113.73 / sec (426)
Other Stats
Range:0-5m
Special Attack Cost:102
Crystal 1: 650,1618 (post cu)
Crystal 2:1070,2619
Crystal 3:1100,0803 (post cu)
Crystal 4:1120,2239
That is one of the main problems post cu... Good pearls with a 100+ dam are rare enough, good pearls with 100+ dam and a decent fc I havent seen or heard of yet...
Drakkosith wrote:
sememon wrote:
600 max damage, FC below 25 and SAC below 110 is a good goal on post cu sabers.
anything with over 600 damage and a named colour crystal will be good enough for pvp.
700 damage and above can realy only be found with pre-cu pearls.
Yikes, that's a really big number for FC. Are most people coming out with around this number on a 4th gen saber?
egha wrote:i have a decent saber its 729 max fc 9 sac 97...but it is also a pre cu saber......but worked hard to get it
I hope u mean made with pre cu pearls, as NO pre cu saber has a sac lower than 100. Sacs lower than 100 are only possible on post cu sabers.