Droid Engineer Archive
Thread: HAM...MMMmmm, now I am hungry for breakfast.
Page 1 of 1
JoninValor
Wed Sep 08, 2004 3:58 am
#1
Good day fellow Droid Engineers,
I have a few questions that I am hoping someone will be able to help me out with.
1. What is the Max HAM for the Probot and R3 droids?
2. I hear things about a 110 Medical Rating for Medical Droids. What is a 110 and how does one achieve that. Also, is that the best rating?
3. When experimenting I have heard many things from different Engineers. Where should experimental points be used when experimenting?
Thanks for all the help.
Jonin Valor 
Master Swordsman/Master Droid Engineer
Intrepid Galaxy
DarkRenown
Wed Sep 08, 2004 4:03 am
#2
I'll see if I can help
1. Not sure, Sorry, Think it is 3000 Probot and 4000 R3 (or thereabouts)
2. 110 means the droid has a Level 6 Medical Module installed. This is the highest rating this module can achieve. You can do it with one Level 6 Module, or 2 level 4's (I believe). the quality of the ingredients dont matter in the construction of the Module, basic success will allow a 110 module to be created.
3. Efficiency. For droids, in most components experimentation doesn;t matter just create the component. For Modules like Combat, Auto Repair, Creature Harvest, Detonation, and the ingredients for Repair/Construction Kits it does, and it should all be in Efficiency.
When you come to assemble your final droid, use high OQ resources for the resource slots, and experiment everything on Efficiency - this increases the HAM of yoru finished droid. The other attributes don;t seem to affect anything.
Please add more, correct me if I am wrong fellow DE's
Thanks
Velneth
Wed Sep 08, 2004 4:24 am
#4
Med Rating 110 is the best, yes.
Basicly, a Med Centre has a rating of 100. This applies to healing, buffs etc inside it.
A 110 rating gives you a 10% improvement on your medical actions than standing in a med centre would.
Basicly, a Med Centre has a rating of 100. This applies to healing, buffs etc inside it.
A 110 rating gives you a 10% improvement on your medical actions than standing in a med centre would.
Knocky
Wed Sep 08, 2004 4:27 am
#5
/waves at the Obbo I caught scoping out my vendors yesterday. 
Don't forget the LE's their HAM caps at 6500 6000. 
Message Edited by Knocky on 09-08-2004 07:17 AM
Gavvot
Wed Sep 08, 2004 5:41 am
#6
I think LE is 6K, not 6,5K.
For the R series, they do not all have the same max, but max are very close between an adv R5 and an adv R3.
Also, the DZ70 also have a ham very close to a probot 3K-3,2K.
For experimentation, look at the sticky to rule them all.
For the R series, they do not all have the same max, but max are very close between an adv R5 and an adv R3.
Also, the DZ70 also have a ham very close to a probot 3K-3,2K.
For experimentation, look at the sticky to rule them all.
Obo_alCan
Wed Sep 08, 2004 6:46 am
#7
It was eh.... market research .
LEs were 6k last I checked, but I haven't made one in a while.
.LEs were 6k last I checked, but I haven't made one in a while.
JoninValor
Wed Sep 08, 2004 7:06 am
#8
Thanks everyone for all the help.
I can so far make probots with just over 3000 HAM and my R3's are in the 4400 range. I do not have that uber 1000 resources but my customers will have to take only what I can provide.
Also wondering, is there an up to date speadsheet on making droids? I was going to make up a real nice one if there isn't one around. I found one but it was not up to date.
Jonin Valor
Master Swordsman/Master Droid Engineer
Intrepid Galaxy
Gavvot
Wed Sep 08, 2004 7:15 am
#10
My R3 is 4455, my LE is 5965 and my probot about 3156.
Pretty close to the max, enough for me, and usually enough for my customers.
Pretty close to the max, enough for me, and usually enough for my customers.
Page 1 of 1