Droid Engineer Archive

1) First I have 0003 for DE and I used to macro again to make adv frame unit and its giving me deadeye decoder. I counted the number of the fame unit and it was 108, when i use that it give me the same thing. I set the number down to 89 and got a stupied personality chip. I counted up from 89 and got 96 for the frame unit. I put it in the macro and what do I get **edit** deadeye. Its really frustrating.

2) If i get the problem aboved solved, can someone tell me if their is a way to make the minerals go into the appropriate slot in the crafting tool for the macros.

Thanks!

-----Zav-Yran Cacious - Holocron DE (good proffession) _ Commando

you are going to have to go from 0 to whatever high number.

When grinding Doctor, the grindable item from Medic, the ABEC, kept changing numbers each time I went into another crafting level. I had to manual go through all the combonations.

My suggestion is that you get very familiar with the UI. When you press Enter then the up arrow, you go back into the chat history with previous commands. So start at /selectd 0. If it's not, hit back to the item selection screen and hit <Enter> <Up> <Backspace>(to delete the 0, then 1.

Second question. Doubleclick?

You might be only one or two off of the right value. Remember that you have to skip items that cannot be made. Takes a little work to get going.

The dead eye decoder is probably the highest numbered schematic. If this is thecase every number above your dead eye decoder will give you a dead eye decoder. You have to just play with it a little bit. When you count and you figure out what the number should be for the frameing unit, and then you get something else instead, count fromthat schematicto the framing unit. You may have to do this a couple of times but it is the fastest way I know of to lock it down.

Here is the trick to this one. Start at 00 and count from Left to right, skiping all schematics with a Complexity of 21 or higher. This will give you your schematic number.