Commando Archive
Thread: need advice on slicing this PFT
4% speed and 4% damage slice I would say on this one.
Or go with a 10% critical slice, tho I have no experience myself with those I think they could be quite nasty.
A 12% speed slice would make this weapon really fast but the disadvantage would be your action would drain like crazy.
Hope this helps you
Regards,
Kers
I just sliced mine which had been 1078 max. 8% damage slice will put you at 1138 or so.
8% damage, 2% speed, 3% critical all the way on this one
Wackox wrote:
Being a smugglar and a commando I have done tests on this and i'd go for a full crit slice and then what ever else you can get on it.
Full crit slice wont leave you with any remaining points. Just like anything over a level 2 speed slice will not leaev you with much room to work with. The only one that only eats up customization points at a 20 point ratio is damage slicing. (Thus why if you slice your weapons like I did my PFT at 4 damage 4 speed. you wind up with 85 customization and unable to slice in anything else).
Now if I could just get some of those really killer energy cells I think I could damage, SAC and possibly Speed cap (or at least come DAMN close) one. Cause I capped out SAC on my krayted PFT by over 20 points on assembly....
And that was using a -9 SAC barrel -9 SAC powerhandlers and -24 SAC Stock. So obviously I could make some cutbacks. figgure i've got some pre-cu stocks that are 0 spd 20 SAC. Pop in one of those, a 0 SAC all damage barrel, and then go all damage/spd on the powerhandlers. Even off any SAC in final assembly. And dump the rest into what ever is needed. Any left overs going into elemental (vs spd) and then go for a 100 percent speed slice)
And well since i have a MCom/MBH i dont -really- need the critical damage slice. Though considering with my current speed mods a 2.9 PF drops down to 1.7spd. maybe i'd just go for 100 percent critical.
Ora t least thats my dream! 
Kesslan wrote:
Wackox wrote:
Being a smugglar and a commando I have done tests on this and i'd go for a full crit slice and then what ever else you can get on it.
Full crit slice wont leave you with any remaining points. Just like anything over a level 2 speed slice will not leaev you with much room to work with. The only one that only eats up customization points at a 20 point ratio is damage slicing. (Thus why if you slice your weapons like I did my PFT at 4 damage 4 speed. you wind up with 85 customization and unable to slice in anything else).
Now if I could just get some of those really killer energy cells I think I could damage, SAC and possibly Speed cap (or at least come DAMN close) one. Cause I capped out SAC on my krayted PFT by over 20 points on assembly....
And that was using a -9 SAC barrel -9 SAC powerhandlers and -24 SAC Stock. So obviously I could make some cutbacks. figgure i've got some pre-cu stocks that are 0 spd 20 SAC. Pop in one of those, a 0 SAC all damage barrel, and then go all damage/spd on the powerhandlers. Even off any SAC in final assembly. And dump the rest into what ever is needed. Any left overs going into elemental (vs spd) and then go for a 100 percent speed slice)
And well since i have a MCom/MBH i dont -really- need the critical damage slice. Though considering with my current speed mods a 2.9 PF drops down to 1.7spd. maybe i'd just go for 100 percent critical.
Ora t least thats my dream!
Ya why just have crit when you use crit shot, whats wrong with having a crit on other attacks as well