Commando Archive
Thread: MC FL and HAR attack info taken form TC2
Page 1 of 1
DragonSnack
Fri Aug 20, 2004 7:56 am
#1
I'm running a Master Command/Master Rifleman on TC2
Last night I ran the warren on Dantoonie and here are some of the results:
1. The creatures were about three times the size of their counterparts on the "live" servers (at least the ones on Flurry servers).
I only had to look down slightly to be eye to eye with the huurtons and the dune lizards. (My character is human and was created to ba as tall as possible The people type of NPCs appeared to be the same size as they appearon the "live" servers.
I'd rather fight these than the ones on live.
Bad stuff - None of the cone attacksdamages any aggro'ed characters other than the one targeted. Both the FL and the HAR have this problem.
Good stuff-I can se the graphics for all of theattacks- single and cone for both the HAR and the FL
Not sure stuff-After I figured out that the cone attacks didn't work I stuck with thex1 and x2 attacks.
I went back through the combat log attempting to extract the numbers for the attacks. I ran out of time before I could go through the entire log - I didn't get to the secitons where I used the HAR- I'll see if I can find them tonight.
The numbers I got out of the log don't jive with the numbers that I get from the calculations using theformulas taken form the posts.
( the damage modifiers I saw appears to have change the 5 to 40 and the 8 to 80. <- quick guess on my part.
The FL I usedis speed 4.2 range 482 to 800 with 14% accuracy My speed is 45 and my accuraccy is 110
HAM 10-85-50
Thishas amost the same numbers as theone I have on live.
I used the auto fire very rarely so I only have one or 2 instances of it's affect and both arebetween 700-800
FLsingle 1 appears to be int the 4000-5000 range
FLsingle 2 appears to be in the 5000-7000 range
The FLcone atacks had equal damage numbers.
I did have one FLsingle2 on a huurton for 9147 dmg.
It also appears the time between shots hasn't changed
Appx 3 for FLsingle 1 and 10 for FLs2.
I don't know what to look for to identify DOT damage. Several times I made peice with the NPCs to check for DOT but I saw no visuals or entrys in the log for this. (I found that it issometimes hard to watch numbers with a pack of huurtons biting my ankles, and elbows and other things.
I can't tell you about the rifleman numbers. I'm running a MC/ grinding MBH on Flurry and on TC2 for some reason I didn't have enough skill points to get MBH so I had to settle for Master Rifleman.
Leit Wavelighter on TC2
Odai Wavighter on Flurry
.
Page 1 of 1