Carbineer Archive

Thread: I love my 1.0 speed Carbines!!! : )

Degaulle
Fri Mar 19, 2004 6:43 am
#1

Yes lol.... you heard it right. I have to mention this again as it is just too good. I was lucky enough to land a deal/trade/money where I had some 39+ 1.18 speed Krayt tissues use in 3 enhanced E11's and well as using some Form fitting stocks.

All 3 came out before slice as approx. 101-224 Dmg , 1.0 speed, 32% WC, 1100 plus condition , 31/39/19 ham costs : )

After the slices which were 22% dmg, 28% speed, 25% dmg in that order

124-275, 1.0 speed ( the one I am currently using)

101-223, 0.7 speed ( too damn fast and pointless)

126-283 1.0 speed ( saving this one)

I know the speed is an overkill but holy smolly these carbines rocks...... I am tearing through things so quick it aint funny.

I just wanted to share my little story. It is really fun using them. Firing at 1 sec cap on every single shot is GREAT!!!



Banshari Degaulle
Sentinel, Blade Weaver- Corbantis server
Sithlord8705
Fri Mar 19, 2004 7:05 am
#2

what server because if you dont like the middle one im willing to buy it
ITCMtopaz
Fri Mar 19, 2004 9:46 am
#3

it says corbantis at the bottom of his post



Torpaz Dogano-Master Rifle Doc 4040 Cm 2004
Turnos Airorna-11 point WS Master Architect
haun
Fri Mar 19, 2004 11:00 am
#4



i got a 1.1 dh17 ....i forget the dmg, think it was like 107-260 or something.

(i used the 1.1 for grinding nothing like spamming a special at novice hahaha)

and a 1.7 dh17 that is 128-312



both are krayt.


you really don't need a speed slice like that once you get a decent speed mod.


you can hit the cap pretty easy with 3's and even 4's

Message Edited by haun on 03-19-2004 10:02 AM



--------------------------------------------------------------------------
"Everything seems calm here..."
TAfirehawk
Fri Mar 19, 2004 11:03 am
#5






haun wrote:



you really don't need a speed slice like that once you get a decent speed mod.


you can hit the cap pretty easy with 3's and even 4's






Unless you use the BH Carbs line, max Carbine Speed is +85, which I have and my weapon must be 2.6 speed or faster to cap at 1.0





Iebas Feania
Former Correspondent of the Former Profession, CARBINEER

Degaulle
Fri Mar 19, 2004 12:38 pm
#6

Too true but slices are random as we know : ( Oh well I guess I cant complain



Banshari Degaulle
Sentinel, Blade Weaver- Corbantis server
ForceDisturbance
Fri Mar 19, 2004 12:58 pm
#7






TAfirehawk wrote:





haun wrote:



you really don't need a speed slice like that once you get a decent speed mod.


you can hit the cap pretty easy with 3's and even 4's






Unless you use the BH Carbs line, max Carbine Speed is +85, which I have and my weapon must be 2.6 speed or faster to cap at 1.0






Quick question on this. I do not have the BH carb tree and no SEA's so my carbine speed is +65. I just purchased a krayt laser carb that is around 460 max dmg and 2.2 speed. Will I hit the 1.0 speed cap with this or will I need SEA's or BH carbs ( or a speed power-up as the above stats are non powered-up)? Thanks for the help.




Iefaot Womi ¤ IEBO
Master Swordsguy ¤ Punching Bag ¤ Master Rifleguy
Gimped PVPer and All Around Nice Guy
¤ Ahazi ¤

pentjaksilat
Fri Mar 19, 2004 2:11 pm
#8


it's all 'bout a form-fitted/krayt elite or laser...w/ master carb and +25 attachments, you'll cap if the tissue is moderate speed. 1.0's...eh...good for grinding up to master i guess, but if you can handle a slower carb that does alot more dmg at the cap, that extra speed's a real waste.


i've got a pair of 486 @3.2 lasers...but regretfully made before stocks and buffs got real popular so it's swinging a mere 62min dmg...mitigation hurts it bad, but still has the high-end torque to get very nice damage in. and just lastnight sliced a laser i dropped 1.1mil into (4moderate tissues + ff stock), got a 23%dmg slice which was a bit low...but got to 102-435 @2.5...cap cripplingshot w/ ease, and not a single time last night in 3hrs of pvp did i have an issue w/ not doing enough dmg to anyone.


i don't really like how dependant carb is on attachments & krayt carbines, but if ya do get'em...you're good to go...'cept of course CMs are making me want to drop CH for doc, assuming publish8 doesn't make mind poison/disease much less of an issue.


~pentjak



retired: 09/02/'04.
RIP Dunadan
...being perfected in a short time, he fulfilled long years; for his soul was pleasing to the Lord, therefore he took him quickly from the midst of wickedness...

pentjaksilat
Fri Mar 19, 2004 2:15 pm
#9

oh, and for an servers w/ decent green diamond gemstone...get those advanced scopes, my laser's +83 ideal, and 2 krayt elites i had done were +74 ideal...alot nicer than the 486's w/ +32ideal. w/ the stacking not so bad since publish7 and max accuracy/accuracy.while.moving, don't think there's anyone i can't hit 75% of the time.


~pentjak




retired: 09/02/'04.
RIP Dunadan
...being perfected in a short time, he fulfilled long years; for his soul was pleasing to the Lord, therefore he took him quickly from the midst of wickedness...

ForceDisturbance
Fri Mar 19, 2004 2:26 pm
#10






TAfirehawk wrote:

You need a 1.14 speed weapon to hit the Speed Cap with +65 Carbine Speed. Powerup will take that laser down to 1.47


You need +81.8 Carbine Speed to cap that weapon without a powerup and +72.8 speed with a Powerup.







Thanks for the info. I am leaning toward picking up BH carbs and investigation 3 to hunt jedi so I will easily cap with that I suppose.



BTW, TAfirehawk, make me a cool sig like yours! I grow tired of the glowy sig I have and I am deficient in html and all of that stuff.


Message Edited by ForceDisturbance on 03-19-2004 04:28 PM



Iefaot Womi ¤ IEBO
Master Swordsguy ¤ Punching Bag ¤ Master Rifleguy
Gimped PVPer and All Around Nice Guy
¤ Ahazi ¤

TAfirehawk
Sat Mar 20, 2004 1:13 am
#11

You need a 1.14 speed weapon to hit the Speed Cap with +65 Carbine Speed. Powerup will take that laser down to 1.47


You need +81.8 Carbine Speed to cap that weapon without a powerup and +72.8 speed with a Powerup.





Iebas Feania
Former Correspondent of the Former Profession, CARBINEER

BMGundam
Sat Mar 20, 2004 1:37 am
#12



TAfirehawk wrote:


haun wrote:
you really don't need a speed slice like that once you get a decent speed mod.
you can hit the cap pretty easy with 3's and even 4's



Unless you use the BH Carbs line, max Carbine Speed is +85, which I have and my weapon must be 2.6 speed or faster to cap at 1.0




If you have master marksman, you can get up to +90 without BH.
CairnTrenor
Sat Mar 20, 2004 1:54 am
#13



BMGundam wrote:


TAfirehawk wrote:


haun wrote:
you really don't need a speed slice like that once you get a decent speed mod.
you can hit the cap pretty easy with 3's and even 4's



Unless you use the BH Carbs line, max Carbine Speed is +85, which I have and my weapon must be 2.6 speed or faster to cap at 1.0




If you have master marksman, you can get up to +90 without BH.




Yup, I've only got 86 at the moment but it's definetly worth it. Using an 172-284 2.9 spd elite atm and it's just great



Cairn Trenor
Master Bounty Hunter
Master Carbineer
Page 1 of 1
Previous Next