Artisan Archive
Thread: Is Power reserve reading correctly?
Mine are acting up. Half the time when I check, they'll read zero but are still working. Sometimes I'll stop by later, and they'll be showing the correct value.
When in doubt, I just throw in another couple of days worth. /shrug
The power display is bugged, the display uses it at twice the rate the harvester does (i.e. if you have 2 days worth of power in the harvester, when you start it, after a short while the display will show 1 day worth)
If you go into the harvester menus, then turn the harvester off then back on again, it refreshes the list showing you the true value.
Turning the harvester off and on will refresh the power value. I've changed my routine to going into options first, turning it off, then on, emptying the hopper, and then putting in power and maintenance.
Make sure you turn the harvester on before you redeed. If you do not, you will redeed with the bugged power amount. If the resource has shifted, change resources, do a quick on, then off, then redeed. The trick to getting the power to display right (and it doesn't really matter during normal operation - only during a redeed) is to turn the harvest on.