Artisan Archive

ok my friend is a Master Artisan and with my help/funding we want to factory crates of Max/Min dmg powerups .. the Muzzle kind .. so we got to trying to get a 32%-16% one .. but when experimenting on the muzzles the max-min experiment only comes up like 1/10 of teh time the rest of the time it makes ranged/point blank/attack cost/etc ..

1) is there a way to make it so that only the Max/Min dmg ones come up to experiment on?

2) we could only experiment up to 10% max and 4% min, how do u get up to 32-16 do u need to use high OQ mineral and chemical?

thx for the help guys

Hiya, to answer question 1, usually one would need to, a: create a power up that starts off with Max dmg. I've had these come up from 0.6-6.0 or so, but the end result is the same, so dont put too much time into trying to come up with a high dmg starting powerup. Once you make a Max Dmg muzzle, experiment using one point at a time until you use up your 10 experimentation points. Coming up with minimum damage second stat may take more than 1 or 2 tries, I've have to go through hundreds of powerups to get the stats I wanted. You want to get all "Great Success" or better, I throw out the powerup if anything less comes up. I recommend to create a schematic so you can produce up to 1000 powerups using a factory.

Question 2: You definately require high OQ resources. I use 990+ OQ minerals and 970-980 OQ chemicals to get 32/16 max min muzzles. To get 33.16/16.33 powerups I've used, in the past, 990-1000 OQ Mineral and 991-995 chemicals, unfortunately these high OQ resources are scarce and expensive so I stick with the 32/16 powerups. Also you may be given a 3rd, 4th and sometimes a 5th stat if experimentation goes very well. I've seen 33/16/8/4/2 on one powerup, butthats very rare.

Well i hope this helps, if you have any questions, PM and I will try to answer your questions the best I can.

Uther [Bria]