Armorsmith Archive

Can i get a rough estimate to stats i should aim for in stun layers....aiming for 30%+ stun, then base as high as possible.

Not knowing what your resources can do:

Just make 3 stun layers with 10% in the special, then put any remaining points into base. not much else you can do, tho I would recommend putting 5 points down at a time on the resist and get a amazing to hit 10% with 5 points (to give you an extra point to base.)

That will give you 30% maybe 31% stun and a base thats decent.

Since you'll most likely be using Adv Comp Segment, you'll have 3 layers to use. Now the end result for stun is the combined total of the layers used. So if you can make 15% layers you'll only need 2, but if not you'll only need 10% layers and use 3 in the segment for a 30% stun.

I make 36% stun and that's based off getting 12% stun reistance off the segments themselves and putting 3 of the layers into the ADV segment

Might be better off makin 25%stun (max base on 3 stun layers). With all the 60+ base ADK PSGs now, that should be sufficient.

-----------------------------------------------------------------------

Ledaw

cool thanks ill go give them a whirl