Armorsmith Archive
Thread: Valcyn Stun armour resource question
Page 1 of 2
Camofrey
Mon Feb 14, 2005 5:25 pm
#1
With the introduction of the resource kits i have the ability to get some old resources - as we all do.
My question is what resources do i need to get a decent base (approaching 70%) with a high stun.
I am currently hitting 38% Stun but the base is 66%. (If i do 36% Stun, i get 68% Base - with base janta i get 71%)
I have Okie and Avig for the stun - server best i beleive.
I have the Ivoli Talusion wooly hide - server best
I also have Iorov - so thats as good as it gets.
What else do i need and what base can i hope for?
All my other resources are those gathered in the last 3 months so i suspect there are better ones out there that may bump my base.
Thanks for any assistance.
My question is what resources do i need to get a decent base (approaching 70%) with a high stun.
I am currently hitting 38% Stun but the base is 66%. (If i do 36% Stun, i get 68% Base - with base janta i get 71%)
I have Okie and Avig for the stun - server best i beleive.
I have the Ivoli Talusion wooly hide - server best
I also have Iorov - so thats as good as it gets.
What else do i need and what base can i hope for?
All my other resources are those gathered in the last 3 months so i suspect there are better ones out there that may bump my base.
Thanks for any assistance.
justapilgrim
Mon Feb 14, 2005 10:39 pm
#4
gilkopine for the layers as well
I think you can get base to 67% as well with double amazing layers. You prob low on something in final combine
make sure you using Elat (not Civa), and your berrylius might be a little off
use new alum, with legonair (or whatever it is called)
WolfGuy
Tue Feb 15, 2005 12:10 am
#5
I think Ocem is better for the layers.
Name Class MA OQ SR UT
Ocem Kammris Iron 517 961 987 918
I can't find the stats for Gilkopine right now. They are close but not has high as Ocem.
Name Class MA OQ SR UT
Ocem Kammris Iron 517 961 987 918
I can't find the stats for Gilkopine right now. They are close but not has high as Ocem.
justapilgrim
Tue Feb 15, 2005 12:53 am
#7
when you are experimenting on stun layers
usually done with experimenting 7 points into the special resists (bottom row), if you get an amazing, you should max that row
then....experiment on the base with remaining points, and get another amazing
so....you need 2 amazings in a row for your schematic, an assembly bonus with a +15 tool, a 43+ station and in a research facility all help. Also, after first amazing, pop a bespin port to increase your chances for the second experimentation
you can burn through a lot of great resources this way lol
G00R00
Tue Feb 15, 2005 2:08 am
#8
I Got 3/13, and i got 39/66 on final
can u tell me stat of your layers when u make 40/67?
thanks
can u tell me stat of your layers when u make 40/67?
thanks
AndJusticeForAll
Tue Feb 15, 2005 6:46 am
#9
you need 87% experimentation in the special on the layer for 40% stun.
my 67-68/40 stun comp layers also have 56% base.
i experiment both lines maxing the special first, and save one point to boost the special to 87% at the end. this is a double amazing
TheFightingCorcoran
Tue Feb 15, 2005 3:45 pm
#10
justapilgrim wrote:when you are experimenting on stun layersusually done with experimenting 7 points into the special resists (bottom row), if you get an amazing, you should max that rowthen....experiment on the base with remaining points, and get another amazingso....you need 2 amazings in a row for your schematic, an assembly bonus with a +15 tool, a 43+ station and in a research facility all help. Also, after first amazing, pop a bespin port to increase your chances for the second experimentationyou can burn through a lot of great resources this way lol
Ok makes sense.
Skinny are you a FS crafter? If so do you find a big difference than when you didnt have it? Im kinda conflicted on the whole desicion.
WolfGuy
Tue Feb 15, 2005 6:00 pm
#11
Can we hit 40% stun on Valcyn? The best I can do is 39% stun 67% base unenhanced and I am pretty sure I have the best or close to the best resources but I could be wrong. I am yet to see 40% stun (non-patch day) on Valcyn but I am pretty sure I haven't seen every piece of armour made...
justapilgrim
Tue Feb 15, 2005 7:57 pm
#13
Skinnymando is, Chubbs is not
definate increase in number of amazings with the experimentation line
Page 1 of 2