Armorsmith Archive
Thread: Made this last night, What should i charge??
Page 1 of 1
Crinton
Tue Mar 02, 2004 5:52 am
#1
Prices vary widely from server to server. Your best bet is to go to a few different armor shops and price your stuff comparably to what they're charging. Or, just pick a price and see if it sells. 
UmmonPrime
Tue Mar 02, 2004 7:47 am
#2
Base is a bit low. You could prob get about 200k for it though.
icetor
Tue Mar 02, 2004 7:55 am
#3
I am fairly new at this and I would like to know how you got 80% on that; I not yet seen 80% mostly 60% and i am using mostly 900+ resoruces
and i have read and re read the instructions but I am overwhlem by it all. I am not a holo grinder i want to be a good armorsmith and I really want
to do this the right way.
Thank you for all your help
Icetor
Arcus
Tue Mar 02, 2004 8:07 am
#4
On our server, Tarquinas, that set would go for about 125k. However, on our server we have at least three armorsmiths making base 69% with 80% kinetic.
-Wicca
lesniak
Tue Mar 02, 2004 9:37 am
#5
Well firstly imwas aholo grinder and i thought i'd make good use of it while i had it!
I was just experimenting and when i made this, i decided i could make a decent armorsmith! and make some cash in the process!!!
How could i raise Base resists and lower HAM????
i would appreciate it,
Darko.
UmmonPrime
Tue Mar 02, 2004 9:39 am
#6
what is the kinetic % on your layers? You may be able to lower that and still hit 80%. This will allow you to throw exp points into base.
hopnasty
Tue Mar 02, 2004 10:39 am
#7
Your kinetic layers % are too high. You need to get about 4%-5% kinetic layers and 2% base, triple layer the adv.composite segment, then experiemnt the final product on the base only, then use the rest of your points into lowering HAM (also raises special protection) to get to 80% with decent base of about 58%-65% depending on your resources. Hope it helps!
lesniak
Tue Mar 02, 2004 1:45 pm
#8
ADV Comp
Condidtion is 37514
Kin 80%
Elc 61%
Heat 43%
Cold 43%
blast 43%
Acid 43%
Restraint 43%
Stun - Vunerable
Some on give me a clue please????
Darko
1M1Alex
Tue Mar 02, 2004 1:59 pm
#9
First: HAM's?
Second: What do you want our help turning it into? Raise base effectiveness? Lower HAMs?
Looks like you need to experiment more on base effectiveness (quality) on your layers. Special protection is added on top of base effectiveness so 4% kinetic SP layers with 4% base effectiveness gives 4% total to base and 8% total to kinetic. I can only guess you experimented mainly on special protection for your kinetic layers which is largely pointless in adv composite.
Second: What do you want our help turning it into? Raise base effectiveness? Lower HAMs?
Looks like you need to experiment more on base effectiveness (quality) on your layers. Special protection is added on top of base effectiveness so 4% kinetic SP layers with 4% base effectiveness gives 4% total to base and 8% total to kinetic. I can only guess you experimented mainly on special protection for your kinetic layers which is largely pointless in adv composite.
Page 1 of 1