Armorsmith Archive
Thread: Factories!
Page 1 of 1
JacobJansen
Sat Jun 26, 2004 8:41 am
#1
I am new with armor smith and just got a factory. Now, I place all the required resources inside the hopper and then start the factory. Every time I get an error e-mail saying it needs more of something. I don't know what I am doing wrong. Can anyone help me?
Nguto
Sat Jun 26, 2004 9:23 am
#2
it has to be the specific recource which was used to create the schematic, so check in the input hopper and check if the recources you are using have the same name as the ones that are listed in the needed ingredients list.
TenderBranson
Sun Jun 27, 2004 7:48 pm
#3
Hi,
you would want to take note of several items
1) Resourced used. if you have used Mivona Duralloy Steel to make the schematic, you will need to load Mivona again. You cannot use any othertype of Duralloy Steel.
2) If your item needed sub combines, for example PSGs, you will need these from the same factory crate. (same serial number) else it will also not work.
Check it out. It is usually problem 1 or 2
GreyRadean
Mon Jun 28, 2004 1:33 am
#4
Also, just to state the obvious: make sure you are using multiples of the resource amount your schem' calls for... if you used 10 in the crafting of the schem' and want 1,000 finished product, make sure you have 10,000 of that same resource in the factory etc. 
JacobJansen
Wed Jun 30, 2004 8:19 am
#5
My thanks for all the help. The problem I was having is the resources in the factory are not the same as I made the schem with...
Page 1 of 1