Armorsmith Archive

well using NS layers replaces the kinetic layers, so u wouldn't get ur 80% kinetic with the layers. But adding NS shards into the mix would lower the hams quite a bit good shards would be -15/-15/-15 and anything over thats is better of course. as for how many here we go.

• Chest = 5 identical


• Pants = 4 identical


• helm = 4 identical


• boots = 3 identical


• gloves = 2 identical


• all arm pieces = 3 identical each

each segment needs a NS shards and some pieces of composite need more then one segment. So my list is exactly what you would need in terms of shards ^_^

The gloves will only require 1 Piece as they only require one segment...

However if you were to find a lot of 7 identical shards, you could use one of them to make a schematic and then create 6 segments which could be used for a helm and legs...

Theoretically the Minimum you would need is 22 identical pieces, but that is virtually impossible so...

Basically you need to know this...

Chest =4 identical segments

Pants =3 identical segments

helm = 3 identical segments

boots =2 identical segments

all arm pieces = 2 identical segments each

gloves =1 segment

so from this you can look at how many identical shards you have and then group the segments together, ie looking back at that 7 shard loot we had...

Assuming you get the schematic on the first shot, you would be able to make 3 arm pieces, Or a Chest and an arm piece/boots Or 6 gloves etc...

Hope that was a bit helpful...

-40 omg /drool ya thats what i am talking about thanks 4 the help guys now i can sell them dustey layers and buy some shards. One more question tho is their any layer component i can loot or is a crafted one going 2 b the best??