Architect Archive
Thread: I can't make a Ber 13 today, anyone else having issues?
Page 1 of 2
Manusara
Wed Jan 12, 2005 5:55 pm
#1
I have cranked out a few hundred chemical extractors in the past 6 months but tonight I can't hit Ber 13 with 11 points. I'm an 11 pointer.
Anyone elese having any issues? I'm using top notch steel, ore, and sub components and of course lube oil but I max out at 12 no matter how many points I keep adding up to 11. Did something change today?
Thanks for your replies in advance.
Message Edited by Manusara on 01-12-2005 07:56 PM
Pawlin
Wed Jan 12, 2005 6:08 pm
#2
Normally when people have this problem its an issue with the mining component. So please try making a new schematic from scratch and make sure you experiment up as high as possible > 90%.
But there is one other report a few thereads down at the moment of the same problem. Might be more than a coincidence.
Anyone else try making BER13's today??
Pawlin
Wed Jan 12, 2005 7:55 pm
#3
I just made a BER 13 flora with existing 99% harvesting mechanism. I hit BER 13 with 77% and 7 points experimentation.
yodachaos
Thu Jan 13, 2005 6:00 am
#4
this happened to me about 4 or 5 months ago. remade the OMU and it worked.
Manusara
Thu Jan 13, 2005 7:31 am
#5
The TFUs I'm using a made a few days ago and were 95%. I remade a schematicthis morning and am oing a new factory run with the same materials so I'll test again with the new ones. Thanks for the feedback I'll post my results.
dantaglo
Thu Jan 13, 2005 7:51 am
#6
little_purple_person wrote:
i'm glad to see im not the only one having this issue.
the problem is the OMU's, mine were all +90% but made in a large batch about 2 months ago, when a made a few fress ones as a test i hit ber 13 no problem.
it seems all my older components have become bugged.
Try making some new OMU's and see if it works , let me know your results
I checked with the ones that I made the OMU's BER7 That I made on TEMP Tuesday, and those still work
TaineKalel
Thu Jan 13, 2005 8:25 am
#7
Ok guys, I've been looking for an answer to this, I've checked the stickies and I've done searches but haven't found an answer. In making BER13 Harvesters, should my subcomponents be coming out BER6 or BER7 to achieve a BER13 rating. I have 11 EXP points and I experiement fully with good success on each one. Please tell me I'm doing this right, other wise I have subcomponents for 70 harvesters that will only be BER12. Thanks for the help.
Pawlin
Thu Jan 13, 2005 10:53 am
#8
TaineKalel wrote:
Ok guys, I've been looking for an answer to this, I've checked the stickies and I've done searches but haven't found an answer. In making BER13 Harvesters, should my subcomponents be coming out BER6 or BER7 to achieve a BER13 rating. ...
FAQ entry:
Q-5.7: How do I make a good BER 13 heavy / BER 10 medium harvester?
Says:
"...The mining unit should be highly experimented and in the 90's. The medium level units should say BER 4 on the schematic and the heavies should be BER 6...."
BER 6 is the current maximum. But BER 6 is not good enough. YOu need to experiment it as high as possible, preferably up to the 95-99% range.
We were able to hit BER7 only on Temporary Tuesday the one day back last March when they changed experimentation for a day. Some people still have schematics or parts left from that one day. BER7 mining parts alone don't do much really over a BER6 though.
...I have 11 EXP points and I experiement fully with good success on each one. Please tell me I'm doing this right, other wise I have subcomponents for 70 harvesters that will only be BER12. Thanks for the help.
You say "good success" do you mean that during experimentation you get a "Good Success"? Because that will not be enough. You need to get Great Success or Amazing Success in experimentation.
little_purple_person
Thu Jan 13, 2005 1:51 pm
#9
i'm glad to see im not the only one having this issue.
the problem is the OMU's, mine were all +90% but made in a large batch about 2 months ago, when a made a few fress ones as a test i hit ber 13 no problem.
it seems all my older components have become bugged.
Try making some new OMU's and see if it works , let me know your results
Pawlin
Thu Jan 13, 2005 3:36 pm
#10
Elyssa wrote:
I think thatElitist King Pawlin is going soft in his old age.
TaineKalel wrote:
also thank you Pawlin for not chastising me for missing that part of the FAQ, likeI said before, friendliest bunch in the forums here.
/dawns paper crown
/tightens knot in bathrob
Thats KING Pawlin The Elitist !!!
Elyssa
Thu Jan 13, 2005 3:49 pm
#11
Forgive me, my King.
I, Lady Elyssa the Condescending, do offer my most humble apologies for makingso grievous an error and vow to never again speak thy name in error lest I be thought a fool.
/curtsey
/pathead Pawlin 
TaineKalel
Fri Jan 14, 2005 1:11 am
#12
Thanks Pawlin, I can't believe I missed that part of the FAQ. Need to stop doing my research while at work I suppose.
I meant to say "great success" on my main sub components, and nothing but that, maybe an "amazing success" mixed in there. I'm pretty sure I got into the 90's everytime I experimented.
Thanks again for the help, and also thank you Pawlin for not chastising me for missing that part of the FAQ, likeI said before, friendliest bunch in the forums here.
Elyssa
Fri Jan 14, 2005 1:31 am
#13
I think thatElitist King Pawlin is going soft in his old age.
TaineKalel wrote:
also thank you Pawlin for not chastising me for missing that part of the FAQ, likeI said before, friendliest bunch in the forums here.
Page 1 of 2