CUEmu - Thread Posts

plasmagunner

Wed Aug 03, 2005 10:18 pm

I respeced to Master Arch from Master Doc when I came back to the game, so forgive me if its noobish.

Iv been trying to make some decent Harvs, mainly Mineral.

The best Iv been able to do is a BER 9 on Med, and 12 on Large.

Now Iv gotten BER 4 and 6 Respectfully, and use HR- 914, SR-910, and UT- 918 steel. Im running green in EVERY resorce area...but the gas. I can never get a gas (or chem when crafting tools) to register on the quality bar. Usualy needs a toughness and, well gas doesnt have a UT.

Am I doing somthing wrong? Not using the right resorces? Do I just suck as a Arch? :/

Sepi Ine- Master Architect/Civilian
Manager of Naboo Sectors Imperial Engineering Corps.
Come to my vendor in the Nabubu mall! I have sub-par harvesters!
Custom orders welcome

Pawlin

Thu Aug 04, 2005 9:54 am

#2

What you probably need to do is make sure your mining part is experimented as high as possible. Its not good enough just to hit BER 4 or BER 6 on the mining part, you want to experimenent it > 90% range.

That steel is kind of marginal quality but should be about good enough. I would recommend looking for a duralloy with better stats though, cause that will make it easier.

Gas quality doesn't matter since it doesn't have the stats relevant to harvesters.

Pawlin Construction of Kettemoor.
Harvesters and Crafting stations - Triad Coronet Mall just outside Coronet (-177 -5490)
Architect, House, Furniture, Harvester FAQ
Oprolan the Wookiee of Sunrunner. Cheap resources W. Daeric Talus (-639 -3058)
"Worst FF ever *thumbsdown*" -- Pawlin fan club
"I am not going to win Miss Congeniality again this year in the Senate." -- John McCain

** Please refer to Elyssa's answer

Poohba

Sat Aug 06, 2005 1:44 am

#3

Make sure your using Lube Oil as much as possible when crafting that stuff, it has none of the stats you need so it fills the spot and doesnt count for you or against you.

Agreed the metal your using is good but you can probably do a little better. Experiment needs to get to 90% or higher in the components in my experience to assure a BER 10-13 extractor.

Make sure your experimenting a few points at a time also, doesnt always make a huge difference but 1-2 points at a time vs 5-10 at a time can sometimes grant a small but noticable difference.

Smithing & Mining Corporation (SMC)
Vendor for Rares,Loots,Paintings,Deeds Coronet -251-5591

Colonel Poohba Matix,Imperial Ace Pilot
Master Architect(12pt) Master Armorsmith(12pt)
Master Merchant(12pt)

"Money can't buy happiness, but I have enough to rent it"

Stownhart

Sat Aug 06, 2005 4:34 am

#4

/agree. You should live and breath Duralloy Steel. Try to not settle for less than 950 on UT, SR and HR

bluejanus

Sun Aug 07, 2005 12:48 am

#5

Stownhart wrote:
/agree. You should live and breath Duralloy Steel. Try to not settle for less than 950 on UT, SR and HR

Actually you can do with less on HR and SR, you'll have to experiment yourself to see what you're tolerant of. Don't forget Carbonite Steel, Kammris Iron, and Quadrenium Iron. The quadrenium can sometimes be good enough for mineral and water harvesters, sometimes not.

Isander Aperin - Kettemoor Master Architect (home: Serenity, Naboo)

Structures vendor in the HorkCo Shop near Coronet, Corellia (CLOSED)

Structures vendors in the Mos Mesric Mall near Mos Espa, Tatooine (CLOSED)

Structures, jedi kit, crafting station and resource vendors in Serenity near Kaadara, Naboo (CLOSED)

Architect Archive

Thread: Noobish Question :(