Architect Archive

Thread: Arcihitect Apron? Is it worth it.

Twenty-K
Tue Mar 09, 2004 5:02 am
#1

Ok,


I have found an Architect Apron from a fellow crafter in town. The price is up there almost 1 Million. While business has been good I am wondering just how much help this would really be.


If anyone has one or has used one please let me know the pro's and con's of.


Thanks for you time.


-



Visit beautiful Nar Emiki on Corellia (Chilastra) at 1985 4850. A good town with great people and lots of goods to sell. Special orders are also welcome.
Bandola
Tue Mar 09, 2004 6:08 am
#2

On it's own it has no value at all. in order to gain 1 extra experimentation point you need +10 to structure experimentation, the apron has +5, it also has +5 assembly, which is supposed to help you reduce crits, but again you need +10 before there is any effect. I would suggest that with the changes to experimentation the apron could be a good starting point to getting extra experimentation points, you will be able to augment this later with additional skill tapes to take you to +10 or above.


I would not really care to hazard a guess about the value here, there are 2 points to consider:


1. These are relatively rare at the moment, but becoming more common as more players do the theme park, more common should in theory mean cheaper.


2. The demand for these may increase if architects find that with the revamped experimentation coming in publish 7 they could benefit from an extra point or 2, more demand should mean more expensive.


You might find a better deal by buying the schematic and resources needed, these seem to work out cheaper, but I don't know what skills you need to be able to craft one.


I paid 1 million for the one I got, but I paid that because I wanted 1 in White, in the end I was ripped off because the one I had delivered was Brown. On that note if any archs on Bria reading this have a White architect apron they wouldn't mind swapping for a Brown one please contact me to discuss terms, I have advertised on the Trade forum, but as this is an Arch specific item I hope y'all don't mind me asking here.


So, hopefully I have answered you and got a plug in for my apron at the same time






__________________________________________________________
Bandola Da'Gear
-RETIRED-
((The Blue Ghost))

ElBlufer
Tue Mar 09, 2004 7:06 am
#3

I personally think that it is worth it and own one myself (of course...I also gathered 5 points worth of skill points so that I have 11 exp points)



Elliott Blufer

Master Architect of New Acropolis
Elliotts Deeds is located at -7175 -3908, on Naboo
Architect Forums - Carbineer Forums - Valcyn Trade Forums
Official Carbineers Motto: I bet I can kill me before you can kill me!
Pawlin
Tue Mar 09, 2004 10:38 am
#4

Does the assembly skill require 10 point increments to have an impact? I would have thought that it wouldn't. We know that experimentation points for experimentation are gained in increments of 1 point per 10 skill points. However structure assembly has no such effect that I'm aware of.


If you have 100 structure assembly skill then wouldn't a +5 structure assembly skill enhancemnt give you a straight 5% increase?





Pawlin Construction of Kettemoor.
Harvesters and Crafting stations - Triad Coronet Mall just outside Coronet (-177 -5490)
Architect, House, Furniture, Harvester FAQ

Oprolan the Wookiee of Sunrunner. Cheap resources W. Daeric Talus (-639 -3058)
"Worst FF ever *thumbsdown*" -- Pawlin fan club
"I am not going to win Miss Congeniality again this year in the Senate." -- John McCain


** Please refer to Elyssa's answer
MistakenIdent
Tue Mar 09, 2004 10:43 am
#5

WithPublish 7, the extra 1 point in expermintation may well be worth the investment. I paid 350K for my apron, have a +5 Bandolear, and am looking to increase my total points into the +25 range (so I get 2 more points.)


Jury is still out on complexity and assembly tapes though. I haven't seen a need for either as a Master Architect. I still crit as often with or without the tapes/aprons.


Bandola
Tue Mar 09, 2004 11:52 am
#6






Pawlin wrote:

Does the assembly skill require 10 point increments to have an impact? I would have thought that it wouldn't. We know that experimentation points for experimentation are gained in increments of 1 point per 10 skill points. However structure assembly has no such effect that I'm aware of.


If you have 100 structure assembly skill then wouldn't a +5 structure assembly skill enhancemnt give you a straight 5% increase?









I had assumed that since assembly goes up in +10 / +20 increments as you climb through Furniture I-IV that they would work as with experimentation and that whatever advantage there may be, now or at some time in the future, would also rely upon a min of +10 to affect it. But I have to admit it was a statement made with no evidence, I had simply always assumed it worked like that. If you say otherwise I bow to your greater knowledge (no sarcasm, I really mean that).


Just a small aside, I wore my apron the other day to craft some floras by hand, now admitedly I only have +5 as I am still looking out for decent skill tapes, but I certainly saw an immediate effect on my assembly. I usually crit about once a week and almost always get 'Great', well with my new aprn I critical failed 3 times in a row, fortunately this was on the combine, so I just tried again and again until it worked, but then on 3 harvesters I got 'good' or 'moderate' whilst experimenting. I have taken the apron off again, and now things are back to normal. I wonder what will happen when I get +10....

Message Edited by Bandola on 03-09-2004 10:55 AM




__________________________________________________________
Bandola Da'Gear
-RETIRED-
((The Blue Ghost))

Dex1138
Tue Mar 09, 2004 2:15 pm
#7




You might find a better deal by buying the schematic and resources needed, these seem to work out cheaper, but I don't know what skills you need to be able to craft one.





You can't really buy the schematic. It called Crafter's Apron until a Tailor learns it. No one knows unitl that point which apron the schematic will make.



Tol "the Travelling Tailor" Doneeta
* Threads N' Things *
Fine Clothing and Furniture
Master Tailor | Kauri
(no relation to Tott Doneeta)


Page 1 of 1
Previous Next