Architect Archive
Thread: Fusion Ion Generator Question
Page 1 of 1
Skyvold
Thu Sep 25, 2003 2:34 pm
#1
What is a Fusion Ion Generator? How does it work? Does it produce larger quantities of power?
Dayln
Thu Sep 25, 2003 2:43 pm
#2
A fusion Ion Generator pulls radioactive ( just like an extractor does )
These radioactives can be used as power, the really good thing about radioactives is that if their power potential is higher than 500 ( which is usually the case ) then they act as more power than their unit size.
I have not tested this thoroughly but 10 units at a rating of 750 seems to act as 15 units when depositing power.
As you can imagine this is the power of choice for all extractors
WillKwan
Thu Sep 25, 2003 4:26 pm
#4
I belive the formula for calculating PE for radioactive was PE/500 = usage time.
So 750 pe would be 750/500 = 1.5
So 750 pe would be 750/500 = 1.5
Nibiru420
Fri Sep 26, 2003 7:17 am
#5
I thought the formula was
if PE>500 then ActualEnergy = (PE/1000)^2 + 1
else ActualEnergy=1
Tiaga
Fri Sep 26, 2003 9:42 am
#6
Got to remember all the benefeits of radioactive as power..
Fusion ion pulls at heavy rate... IE 3.5 times more than a personal. Radioactive often has high PE... And radioactive often has higher concentrations than wind or solar, so the higher rate is even higher still.
Fusion ion pulls at heavy rate... IE 3.5 times more than a personal. Radioactive often has high PE... And radioactive often has higher concentrations than wind or solar, so the higher rate is even higher still.
DaMJN
Wed Jan 21, 2004 10:35 pm
#7
okay they keep saying no Resource is here I can harvest but when I survey they say there is, so is my Fusion Ion Generator bugged or Am I Surveying with the wrong item?
Page 1 of 1